QoS 8025 Video Conferencing setup

(Read 3856 times)

ScotlandTDMA Member ★★ Offline Posts: 22	Jul 21^st, 2009 at 11:20pm Hey Folks Anyone able to help looking to setup a video conferencing sysytem over iDirect, need a little help on the QoS setup i am using the DSCP and Vlan identification on the application up and downstream profiles but i am still seeing pixelized video from remote to hub and it just freezes going from the hub to the remote. any ideas??? Cheers
Back to top	YIM IP Logged

Ex Member

Ex Member

Reply #1 - Jul 22^nd, 2009 at 11:59am

Do have an end-to-end QOS policy, or are you only trying to accomplish QoS at the iDirect layer? �If you are only using the iDirect layer, you will need to take your plan/policys to your border routers and beyond. �An end-to-end solution is tedious but they are the most effective. �Accomplishing it on the iDirect (although it would be nice if it were that easy) is simply not enough, as your traffic is probably getting lost in the router queuing, or simply ending up behind "other" (default) traffic) on the routers. � �In the case of TCP it often ends up out of sequence. �However in your case it is UDP (fire and forget unreliable). � �My guess is you are bottlenecking at the routers....Ingress and egress.

Suggest you break out the wireshark/ethereal and sniff the path...that should help you find your bottleneck.

Back to top

IP Logged