Recommended router for Tooway

(Read 11291 times)

holdgaj Member ★★ Offline Posts: 10	Oct 2^nd, 2009 at 4:06pm I wonder if there is an "Approved" router for Tooway connection ? 4 port + Wireless /NAT/Firewall type ? All the blurb says that one can connect a router but I see no recommended list anywhere. If no official recommendation, what are others using ? Cheers holdgaj
Back to top	IP Logged

europe-satellite.com Senior Member ★★★ Offline Posts: 541 London UK	Reply #1 - Oct 2^nd, 2009 at 5:05pm You can use any "cable" router ! We use Linksys or Netgear but any router will do the job.
Back to top	IP Logged

Broadband-Algarve

Senior Member
★★★
Offline

Posts: 57
Algarve

Reply #2 - Oct 5^th, 2009 at 9:04am

We use the Belkin N1 Vision. �Very easy to set up. �No installation disks to worry about. �Can be set up in all of 5 minutes. �Works seamlessly with XP and Vista simultaneously. � Also gives you a Guest access so you don't have to give out your own WEP key to houseguests.

Just make sure you get the Cable version. �This applies to all routers for Tooway useage as ADSL won't work, it has to be DSL only. �Check out the Belkin website for further info.

https://catalog.belkin.com/IWCatProductPage.process?Product_Id=379601

You can buy online or in most computer shops. �PC World stocks it in the UK.

« Last Edit: Oct 5^th, 2009 at 1:13pm by Broadband-Algarve »

IP Logged

rogerstom Member ★★ Offline Posts: 4	Reply #3 - Oct 13^th, 2009 at 10:47am Hi All, I have bought a Netgear WGR614UK Wireless 54G Cable Router from Amazon to use with my Tooway system but cannot seem to get it to work! Are there any setting I need to change on the router? I am connecting to the router from my laptop with a good signal but it appears to be unable to connect to the internet. Please Help!
Back to top	IP Logged

Broadband-Algarve

Senior Member
★★★
Offline

Posts: 57
Algarve

Reply #4 - Oct 13^th, 2009 at 11:30am

You will probably have to reset your Tooway Modem to reset the IP address. Turn off modem and router, connect router and try again. You may also have to reboot laptop for same reason.

Gave up on Netgear routers and switched to Belkin as so much easier to set up. No install disks needed. Can install the Belkin N1 in all of 5 mins start to finish.

Let us know how you get on.

IP Logged

rogerstom Member ★★ Offline Posts: 4	Reply #5 - Oct 13^th, 2009 at 11:34am Tried that as well unfortunately. Started with everything off, then turned on the Modem, then the Netgear and then my Laptop. Still no joy! Any other ideas?
Back to top	IP Logged

Broadband-Algarve Senior Member ★★★ Offline Posts: 57 Algarve	Reply #6 - Oct 13^th, 2009 at 11:41am Are you running XP or Vista - I notice on the Netgear website there is a new driver for Vista.
Back to top	IP Logged

rogerstom Member ★★ Offline Posts: 4	Reply #7 - Oct 13^th, 2009 at 11:45am Vista, will have a look for the new driver now! Thank you for your help, fingers crossed that this fixes it.
Back to top	IP Logged

Broadband-Algarve Senior Member ★★★ Offline Posts: 57 Algarve	Reply #8 - Oct 13^th, 2009 at 11:49am Didn't look too far but it says for Vista Drivers click here .... Fingers crossed it works.
Back to top	IP Logged

rogerstom Member ★★ Offline Posts: 4	Reply #9 - Oct 13^th, 2009 at 2:01pm I have tried the set up wizard and the Router thinks that the Tooway system has a static IP and is asking for the IP Address, Subnet mask and Gateway IP Address. I was under the impression that the Tooway system used a Dynamic IP address? Still no joy, even with the new driver!
Back to top	IP Logged

Zeses Member ★★ Offline Posts: 1	Reply #10 - Oct 13^th, 2009 at 2:53pm What is meant by a "cable" router? If I do not make a mistake, the DOCSIS functionality is provided with the supplied modem. Anyway I am trying to use a Mikrotik router and for some obscure reasons I do not manage to get connected. Has somebody els had the same problem?
Back to top	IP Logged

Broadband-Algarve

Senior Member
★★★
Offline

Posts: 57
Algarve

Reply #11 - Oct 13^th, 2009 at 2:59pm

The last Netgear router I set up at home took me over 4 hours of hair pulling and nail biting which is why in the end I set it up using the manual setup instructions and decided never to purchase a Netgear again.

I know I harp on, but the Belkin N1 Vision router is so much easier and I have never come across problems like this - it's just a case of plug in power, connect to Tooway modem, configure security and off you go. 5 Minutes and all done.

Try following the instructions for Manual Setup - but be prepared for a long evening ... it's not esay but take it methodically and you should get there.

IP Logged

europe-satellite.com

Senior Member
★★★
Offline

Posts: 541
London UK

Reply #12 - Oct 13^th, 2009 at 6:20pm

Quote:

The last Netgear router I set up at home took me over 4 hours of hair pulling and nail biting which is why in the end I set it up using the manual setup instructions and decided never to purchase a Netgear again.

I know I harp on, but the Belkin N1 Vision router is so much easier and I have never come across problems like this - it's just a case of plug in power, connect to Tooway modem, configure security and off you go. �5 Minutes and all done.

Try following the instructions for Manual Setup - but be prepared for a long evening ... �it's not esay but take it methodically and you should get there.

You can use ANY (cable) router WITHOUT changing any settings ! Never use the setup CD. Any router will connect and work within 1 minute. As soon it is connected you can change settings if you want any time later. All together not more than a few minutes work, simpel and easy.

IP Logged

Sean_Williams Member ★★ Offline Posts: 36	Reply #13 - Oct 15^th, 2009 at 2:05pm We use a D-Link DIR 655. Easy install, once I discovered it needed a cross-over network cable!
Back to top	IP Logged

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.