Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> LinkStar Forum: VSAT hubs and terminals >> Frequencies and symbol rates https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1082282659 Message started by Eric Johnston on Apr 18th, 2004 at 11:04am |
Title: Frequencies and symbol rates Post by Eric Johnston on Apr 18th, 2004 at 11:04am
If you are involved in setting up LinkStar terminals it will be helpful to add the outlink frequencies and symbol rates to the various pages like https://www.satsig.net/ivsat-europe.htm
All inputs welcome. Best regards, Eric. |
Title: Re: Frequencies and symbol rates Post by pius ukachukwu on Aug 5th, 2004 at 7:26am
is there any other way to configure linkstar terminal except telnet?
|
Title: Re: Frequencies and symbol rates Post by kenny on Aug 7th, 2004 at 9:20am
hello pius,
the only way to setup a linkstar terminal is to use Telnet. i have the current manual from viasat to help you. I can teach you how to go about setting it up . where are you in nigeria ? i am in Port harcourt- |
Title: Re: Frequencies and symbol rates Post by M.A.G on Sep 11th, 2004 at 8:39pm
HI i have linkstar but it'v very slow da download rate about 10kb/s but b4 was about 700kb/s
so plz help me |
Title: Re: Frequencies and symbol rates Post by Ahmed Wacho on Dec 12th, 2004 at 9:57am
I can help you for the configuration of Linkstar. I know all the frequencies and symbol rate of West Africa. Which satellite do you want?
Ahmed |
Title: Re: Frequencies and symbol rates Post by FelixSmart on Apr 1st, 2006 at 7:59pm
Hello Ahmed,
Pls I need symbol rate, freq, transponder and polarity for PAS-1R 45'W, NSS-7 22'W, Intelsat 907 27.5'W. Your help will be appreciated. Thanks. Felix Smart E-Mail: felixsmarto@yahoo.com |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |