Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> Dish pointing and alignment >> iDirect 3000 rebooting https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1172158864 Message started by Star on Feb 22nd, 2007 at 3:41pm |
Title: iDirect 3000 rebooting Post by Star on Feb 22nd, 2007 at 3:41pm
I am working on an iDirect 3000,on which i loaded the option file on using iSite 7.0 and since then the unit keep rebooting.I manage to get in thru the console with
User name:root Psswd P@55w0rd! at the prompt # if i type telnet 0, it comes up with a messege unable to connect to remote (0.0.0.0) if i type laninfo it comes "-ash:laninfo "not found" if i type options reload "-ash options not found" May someone help me out rgds Star Monrovia,Liberia |
Title: Re: iDirect 3000 rebooting Post by Star on Feb 24th, 2007 at 11:17am
Thanks,
Yes,i have probelm using iSite.I ping the Modem and get reply but i canot login with the default password. |
Title: Re: iDirect 3000 rebooting Post by kwasasa on Mar 1st, 2007 at 12:10pm
Hi star, i will suggest u try logging to the console with this info:
User Name:root Password: iDirect then u type the telnet 0 command User Name: admin Password: P@55w0rd! |
Title: Re: iDirect 3000 rebooting Post by dirtyred on Mar 10th, 2007 at 11:04am
I have the same exact problem....happened after a upgrade or downgrade rather from 7012 to 6095.
Did you get the issue resolved? If so...how? |
Title: Re: iDirect 3000 rebooting Post by Star on Mar 10th, 2007 at 3:01pm
The problem is not yet resolve.An expert advise that I return the modem to the supplier.I plan to do just that.
|
Title: Re: iDirect 3000 rebooting Post by scter on Apr 27th, 2007 at 5:42am
This issue can be solved by recovery procedures
|
Title: Re: iDirect 3000 rebooting Post by dman on Jul 10th, 2007 at 2:16am
You probably didn't load the option file while loading your image file.
You can send an email to telesatp@gmail.com, then i'll tell u what to do. Or call 08083214688 |
Title: Re: iDirect 3000 rebooting Post by mmabinge on Nov 21st, 2007 at 11:30am
I do not know whether you have managed to resolve this. It happened to me twice after I had loaded an option file meant for another model For the recovery of this modem you need a good option file and the procedure outlined below. Use option where you do not have IP connectivity.
https://www.talia.net/support/index.php?_m=downloads&_a=viewdownload&downloaditemid=65 |
Title: Re: iDirect 3000 rebooting Post by boni_daandel on Dec 31st, 2007 at 6:11am
same problem faced me...
try to recover w telnet command via serial console, base on manual recovery still not work... then i'm sending back to distributor, and also distributor cannot fix either :D have to wait for new modem ... regads |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |