Satellite Internet forum
http://www.satsig.net/cgi-bin/yabb/YaBB.pl
Service Providers >> Satellite Connection in Africa >> Hughes BUC/LNB On iDirect
http://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1175876210

Message started by Malachy on Apr 6th, 2007 at 5:16pm

Title: Hughes BUC/LNB On iDirect
Post by Malachy on Apr 6th, 2007 at 5:16pm
I have hughes equipment and want to change the service to iDirect.  I do not know the specifications of the BUC and the LNB.  I am asking my friends who have used the same with 1.2m prodelin on a DW 1000 and PES 5000 equipment for KENSAT, Kenya, if it is possible to change the modem to either iDirect or shiron RGB 384B?  I am stuck whether it is going to work if I purchased an iDirect or used my other Shiron RGB 384 gateway which is lying in the store.  I am waiting for your professional advice. Can someone advice?

Title: Re: Hughes BUC/LNB On iDirect
Post by pgannon on Apr 20th, 2007 at 3:56pm
To the best of my knowledge, the DW1000/PES5000 product line used standard dish, BUC and LNB components.  

I suggest looking closely at these components to see if you can find vendor and model or part numbers.  

They were generally sold in KU configurations with .5, 1 and 2W BUCs.  You'll likely need a larger BUC unless you find a provider with a strong KU signal over Kenya.  

I would think that your original network operator could also provide you with the information you need.

Good luck,

Pat

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.