Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> HughesNet and Hughes HX VSATs >> PES 5000 Manual Setup Instructions
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1187390636

Message started by rhsanborn on Aug 17th, 2007 at 11:43pm

Title: PES 5000 Manual Setup Instructions
Post by rhsanborn on Aug 17th, 2007 at 11:43pm
I have inherited a poorly setup network and would like some information on how to properly setup a satellite broadband connection. We currently have a Hughes PES 5000 modem directly connected to a server. It serves as the main internet connection for all of the transaction processing here.

First, is it possible for this modem to be connected to a router, or does it have to be plugged directly into the server. Second, there is a parallel port cable running between the modem and the server. Is this simply a cable to allow for shell access on the modem. If so, can I disconnect it with no ill effect?

Finally, does anyone know of a manual for this model or a similar model modem?


Title: Re: PES 5000 Setup Instructions
Post by union on Aug 18th, 2007 at 10:17am
Hi,

The PES 5000 can be connected via a router if needed, the PES 5000 gets its IP address from the NOC so you would need to know the range you can use, the parallel port rs232 would have been used/is used for connection to on site equipment and is not used for shell access. Access to the PES is via a rj11 to serial cable connected to the config port on the rear of the unit using DIU editor software. The PES general ref manual is a 10 meg PDF file I have a copy and can upload it to a free file server if you need a copy. Just let me know.

Union

Title: Re: PES 5000 Setup Instructions
Post by rhsanborn on Aug 18th, 2007 at 7:24pm
PM sent.

Title: Re: PES 5000 Setup Instructions
Post by union on Aug 20th, 2007 at 6:39pm
Replied to PM

Title: Re: PES 5000 Setup Instructions
Post by scooterz56 on Sep 14th, 2007 at 6:06pm
Doesn't the 5000 max out at 256 upload?

That Gen Ref Manual is a HONKER ain't it, 797 pages!

Title: Re: PES 5000 Setup Instructions
Post by ldeleon on Feb 7th, 2008 at 2:35pm
Would I be able to get a copy of the PES 5000 manual as well?

Title: Re: PES 5000 Setup Instructions
Post by USN - Retired on Feb 7th, 2008 at 6:07pm
Doubt you're going to be able to find the big book available for download, but here's a couple links to abridged versions:

* Edited by forum admin 24/9/2014.  These old links now fail *

  comtm.com/download/install_Galaxy2.pdf
and
  evsig.com/docs/Hughes/Galaxy/PES5000%20config.doc

//greg//

Title: Re: PES 5000 Setup Instructions
Post by scooterz56 on Feb 7th, 2008 at 10:19pm
PES 5000 is Narrow Band equipment, you cannot do a Broadband connection thru a 5000.

Title: Re: PES 5000 Setup Instructions
Post by Eric Johnston on Sep 18th, 2014 at 7:57pm
The two links above no longer work.

Does anyone have links to PES 5000 manuals ?

Best regards, Eric

Title: Re: PES 5000 Setup Instructions
Post by RF Network Solutions on Sep 21st, 2014 at 5:53am
Hi, I am looking for the PES5000 Hughes IDU Operational Manual. Please provide.

Regards
Rajesh

Title: Re: PES 5000 Setup Instructions
Post by RF Network Solutions on Sep 21st, 2014 at 5:54am
Hi Again, Actually I would like to test the Hughes 2W Ku band ODU at Bench RF Test up to see the Max Power ( 2W) at Spectrum Analyser. I am not able to find any command to initiate from DIU SW to raise the pure carrier to see the power at Spectrum Analyser or Power Meter

Regards

Title: Re: PES 5000 Setup Instructions
Post by Admin1 on Sep 21st, 2014 at 7:17pm
If you are able to get the command line interface working then it might be worth trying to get the modem to tell you the list of possible commands and then try one that looks romising.

Try these to start, plus any other ideas you might have.
h
-h
help
-help
/?
-?
?/
man

Best regards, Eric.

Title: Re: PES 5000 Setup Instructions
Post by fhoezhinks on Oct 15th, 2014 at 10:41am

RF Network Solutions wrote on Sep 21st, 2014 at 5:54am:
Hi Again, Actually I would like to test the Hughes 2W Ku band ODU at Bench RF Test up to see the Max Power ( 2W) at Spectrum Analyser. I am not able to find any command to initiate from DIU SW to raise the pure carrier to see the power at Spectrum Analyser or Power Meter

Regards


Hi, Hope this can help

- Open DIUCE 555
- Tab Utils
- Terminal
   enter below command :
   - x5
   - q7B10  <-- {where 7B10 is hexa value for center RF}
   - x0
   - x9

Regards,
Fhoezhinks

Title: Re: PES 5000 Setup Instructions
Post by KoredeE on Jul 9th, 2015 at 10:15pm
Oh thank God I finally got someone with this doc.
I do have this doc in time past but it went with a crashed hard drive.
Pls do help me with it I can be reached at esankorede@yahoo.com
Thanks.

Title: Re: PES 5000 Manual Setup Instructions
Post by Admin1 on Jul 11th, 2015 at 11:28am
I have put it here:
https://www.satsig.net/pdfs/PES-General-Reference-Manual.pdf

Please note it is 10.4 Mbytes. Download once, carefully, and save the pdf file locally for future reference.

Best regards, Eric.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.