Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
Service Providers >> Exede satellite broadband forum (was Wildblue) >> SurfBeam SM2000 Sat. modem via XPLORNET https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1204834464 Message started by Ti-Loup on Mar 6th, 2008 at 8:14pm |
Title: SurfBeam SM2000 Sat. modem via XPLORNET Post by Ti-Loup on Mar 6th, 2008 at 8:14pm
Is there some one in this forum that know the existance of a method to get my actual modem status and setup?
How can I communicate with my modem? Is there a software out there that manage those sat. modems? As for checking the speed of my Internet connexion, I use: https://speedtest-east.anikast.net/ |
Title: Re: SurfBeam SM2000 Sat. modem via XPLORNET Post by USN - Retired on Mar 6th, 2008 at 9:09pm wrote on Mar 6th, 2008 at 8:14pm:
I'm not sure of the procedure in Canada. But the method down here is to contact an installer. Given your MAC address, they can access your modem data through a special WildBlue web portal. Tell him/her you're concerned about the performance of your connection, and would like a brief explanation of your current SVT data. I don't know if it's possible, but you could ask if they could take a look at any archived data too. It might be of value for trend analysis. There is no user interface to speak of, and no aftermarket modem management software. WildBlue doesn't want customers playing in their sandbox. //greg// |
Title: Re: SurfBeam SM2000 Sat. modem via XPLORNET Post by vic on Mar 7th, 2008 at 12:26am
The procedure in Canada is to phone Xplornet tech support and they can check your values. They have been know to email a copy but it is not policy so ask nicely. Even the dealers and installers have to do it this way. There is no dealer accessable information as in the US.
There is no way to access the modem as these functions are purposely not allowed. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |