Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl Service Providers >> Satellite Internet - Europe >> how do i log in to a gilat 360e modem and setup https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1206480284 Message started by RS100 on Mar 25^th, 2008 at 9:24pm

Title: how do i log in to a gilat 360e modem and setup
Post by RS100 on Mar 25^th, 2008 at 9:24pm

Can any one tell me how do i log in to a gilat skystar 360e modem? also should it set up dhcp or is it static ip if so what settings do i enter in network settings i am using windows vista,

Also does any one have any setup software or user guide for this modem

Title: hello
Post by Kunbi on Mar 26^th, 2008 at 6:18pm

There is new 1.8m C-band and new 1.2m Ku-band dish with iDirect in my stock. And used 3.8m if u care for any call +2348032087234.

Title: Re: how do i log in to a gilat 360e modem and setu
Post by RovingInternet on Jun 15^th, 2008 at 1:32am

The 360 is not self-hosted. To set it up and to use it, you will need to have software running on your computer. To my knowledge, that software is not compatible with Vista.

I am in the U.S. and they will no longer commission the 360 modems here. There is no support for the software on Vista here. Maybe you'll get a response from Europe that is different.

Title: Re: how do i log in to a gilat 360e modem and setu
Post by NotesConsultants on Jun 15^th, 2008 at 7:17am

Software on the PC is not needed, no fixed IPs needed, just a bit of software for the inital setup and configuration of USB port.
The only variation I can tell to this is 360 modems in Germany were upgraded by Satlynx to the 360E firmware standard.
This to my knowlege is not done anymore by Satlynx

Title: Re: how do i log in to a gilat 360e modem and setu
Post by JF78 on Jun 30^th, 2009 at 7:39pm

When you get into the modem there are a ton of parameters that the hub will have to provide you. With regards to DHCP and Static, that is set at the hub.