Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> Monitoring of Bandwidth link Usage at Remote https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1223999599 Message started by wow on Oct 14^th, 2008 at 4:53pm

Title: Monitoring of Bandwidth link Usage at Remote
Post by wow on Oct 14^th, 2008 at 4:53pm

Hi,

Can we monitor the link bandwidth usage at remote station by telnet into the iDirect router and check?

Any commands to check that?

Best Regards,
wOw

Title: Re: Monitoring of Bandwidth link Usage at Remote
Post by TDMAMike on Oct 14^th, 2008 at 5:07pm

Do you have access to iSite on your specific modem?

If so, you could use it to see IP STATS on your modem.......but you would not be able to see utilizations/stats on the carriers themselves. So, in a nutshell you could see your stats....which may be of little use to you.

Title: Re: Monitoring of Bandwidth link Usage at Remote
Post by wow on Oct 14^th, 2008 at 5:15pm

Hi,

I have iSite but i think iSite is not for monitoring purpose except doing antenna pointing. Like checking the rx snr, need to telnet in to check.

So there is no commands like "rx snr" to check on the link bandwidth usage ?

Best Regards,
wOw

Title: Re: Monitoring of Bandwidth link Usage at Remote
Post by TDMAMike on Oct 14^th, 2008 at 5:31pm

The same telnet password that you use to log into the box and run the rx snr command (from the command line) is the same password you use to log in with iSite. Once in with iSite you can pull down the main menu and select IP STATS. Keep in mind, these statistics are for your modem only.

Title: Re: Monitoring of Bandwidth link Usage at Remote
Post by saif.musa on Oct 13^th, 2010 at 8:19pm

by using iMonitor, you can point to the desired remote station right-click on it. then choosing ( long term bandwith usage). bandwidth used will displaying to ya.