Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> PRTG https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1231754000 Message started by ydh on Jan 12th, 2009 at 9:53am |
Title: PRTG Post by ydh on Jan 12th, 2009 at 9:53am
Hi,
I was trying monitoring remotes with PRTG. I tried using standard SNMP directly to remotes, but failed. should i use custom SNMP with idirect OID's. how? what is remote's OID for tcp traffic? ids version 6.0.9.7 remote 3100 thanks |
Title: Re: PRTG Post by TDMAMike on Jan 12th, 2009 at 11:52am
iDirect has a document specifically for piloting MIBs (MRTG). The document is a bit dated, but I am fairly certain that is is still applicable, even in the latest iDS's.
|
Title: Re: PRTG Post by ydh on Jan 14th, 2009 at 4:34am
I mean using snmp request of PRTG directly to remotes, not from NMS server. is it possible?
|
Title: Re: PRTG Post by TDMAMike on Jan 14th, 2009 at 12:00pm
I think it is a longshot at best, as the remote reports everything to the NMS where it is compiled by the NMS's various server processes and then made available from there. However, I would recommend discussing this with iDirect just to be sure.
|
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |