Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> loading package file using RedBoot https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1234006291 Message started by reset on Feb 6th, 2009 at 8:38pm |
Title: loading package file using RedBoot Post by reset on Feb 6th, 2009 at 8:38pm
how can i load package file and option file using RedBoot??
what are the steps, commands? Please help |
Title: Re: loading package file using RedBoot Post by TDMAMike on Feb 7th, 2009 at 12:48pm
Linux needs to be loaded first.
If you can get to a linux prompt, then the packages and opt can be dropped on root, unzipped, and installed. Can you get to a linnux prompt? What model iDirect? 3100? 500? 7350? iDS version? Reason I ask, is there are additional requirements for 3100 series remote (an upgrade prep pkg is necessary). M |
Title: Re: loading package file using RedBoot Post by reset on Feb 7th, 2009 at 4:27pm
Thanks for reply
my Idirect is 3100 i typed this command into hyper terminal fis load linux exec -c "root=/dev/mtdblock2 console=ttyS1, 9600 single" but I got nothing after it..... do you know how to do a Hardware reset? I need to do a hardware reset for another Modem...I know that I have to do a short cicuit between 2 pins....but i don't know which pins?...can you help me on that one too? if you have diagrams it would be better.....Thanks man |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |