Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> HughesNet and Hughes HX VSATs >> hx50 parameter problem https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1236192835 Message started by zaks90v8 on Mar 4th, 2009 at 6:53pm |
Title: hx50 parameter problem Post by zaks90v8 on Mar 4th, 2009 at 6:53pm
i just finally recived the right parts for my system i set it up and the signal is a strong 91 i let go through all the setting up automatically i entered the right gps twice verified
on the system status page it say rx and tx are ready and operational but it says that the system is ignoring all parameters and has no back up ive tried calling wafa and they have a bad language barrier and they havent returned my emails im trying to find out how to fix this it gave me an option of restoring the last recived parametrs but all it does is limit my access to the router and signal goes down and after a few min of this it goes back to ignoring them when i try to intaller register i enter all values and then when it try to establish connection to sat it times out if anyone could help thanks zac |
Title: Re: hx50 �parameter �problem Post by Eric Johnston on Mar 4th, 2009 at 7:38pm
Please try to get back to the situation "the system status page it say rx and tx are ready and operational".
Once you are in this situation please leave the system powered on and send me a private email to eric@satsig.net with your site ID and all details from the system status screen (right mouse, select all, copy, paste into email). I may be able to help you. Best regards, Eric. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |