Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> iDirect Boot problem https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1238032927 Message started by Space on Mar 26th, 2009 at 2:02am |
Title: iDirect Boot problem Post by Space on Mar 26th, 2009 at 2:02am
When i boot my Infiniti 3100 modem, i get the following Error. When i press space bar 4-5 times, i get Kernel Panic message then the modem freezes.
Have a look at the error and advice me the way forward, thanks in advance. Regds Space RedBoot> DRAM Test ................ DRAM Test Successful +Ethernet eth0: MAC address 00:60:43:00:00:00 IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2 Default server: 192.168.0.2 RedBoot(tm) bootstrap and debug environment [ROM] release, version "iDirect 1.1" - built 16:16:40, Apr 29 2005 Platform: iDirect iDS Platform (XScale) Copyright (C) 2004, 2005 iDirect Technologies, Inc. Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. == Executing boot script in 5.000 seconds - Press <Space Bar> to abort RedBoot> fis load Linux RedBoot> exec Using base address 0x01600000 and length 0x00100000 Uncompressing Linux............................................................. ...... done, booting the kernel. Linux version 2.4.24-uc0-iDirect0 (root@gimli) (gcc version 3.3.2) #1 Sat Apr 12 14:56:34 EDT 2008 CPU: XScale-IXP4xx/IXC11xx revision 1 Machine: iDirect Phoenix Platform alloc_bootmem_low memtable_init Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS1,9600 root=/dev/mtdblock2 Calibrating delay loop... 266.24 BogoMIPS Memory: 64MB = 64MB total Memory: 62572KB available (1678K code, 471K data, 72K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX PCI: bus0: Fast back to back transfers enabled Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module i2c-proc.o version 2.6.1 (20010825) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xff000003 (irq = 15) is a XScale UART ttyS01 at 0xff001003 (irq = 13) is a XScale UART Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx cfi_cmdset_0001: Erase suspend on write enabled Using buffer write method Creating 6 MTD partitions on "IXP425 Flash": 0x00000000-0x00040000 : "RedBoot" 0x00060000-0x00160000 : "Linux" 0x00160000-0x00fe0000 : "RootFS" 0x00fe0000-0x00fff000 : "FIS directory" mtd: partition "FIS directory" doesn't end on an erase block -- force read-only 0x00fff000-0x01000000 : "RedBoot config" mtd: partition "RedBoot config" doesn't start on an erase block boundary -- forc e read-only 0x00fe0000-0x01000000 : "FIS Overlap" pktgen.c: v1.3: Packet Generator for packet performance testing. pktgen: Error: your machine does not have working cycle counter. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded ip_nat_pptp version $Revision: 1.1.1.1 $ loaded ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. https://snowman.net/proje cts/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> Other stuff added by David S. Miller <davem@redhat.com> NetWinder Floating Point Emulator V0.97 (double precision) VFS: Mounted root (jffs2 filesystem). Freeing init memory: 72K /bin/sh: can't access tty; job control turned off / # |
Title: Re: iDirect Boot problem Post by Zoulou23 on Nov 2nd, 2015 at 8:51am
Dear all,
I have same problem, i have domaged my idirect evolution x3 while atempting to recover it. File missing is lunix and rootfs please help me with procedure to recover and make it Alive again. My e-mail adresse:ndeopatrick@gmail.com |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |