Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl Service Providers >> Satellite Connection in Africa >> Feeds wanted urgently https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1252359484 Message started by VSATero on Sep 7^th, 2009 at 10:38pm

Title: Feeds wanted urgently
Post by VSATero on Sep 7^th, 2009 at 10:38pm

We have a need for large numbers of ku feeds for 1.2m ,1.8m and 2.4m antennas for a project in Lagos Nigeria.Please send quotes to ima_ero@yahoo.com or iero@skylogsolutions.com. Phone +2348053038160

Title: Re: Feeds wanted urgently
Post by Eric Johnston on Sep 7^th, 2009 at 11:09pm

Please say what manufacturer and model number are these antennas and feed support arms.

The type and diameter of Ku band feed horn needed must match the f/d ratio of the antenna reflector and the yoke mounting arrangement must also match with the feed support arm and the required focal point.

Do you need OMT and transmit reject filter as well ?

Best regards, Eric.

Title: Re: Feeds wanted urgently
Post by VSATero on Oct 8^th, 2009 at 6:20pm

We would require feed assembly for channel master ku band.
Model number 678308 and model 61167830c.

OMT /filter /feed horn

Title: Re: Feeds wanted urgently
Post by Forum Admin on Oct 8^th, 2009 at 7:30pm

Here are images of two types of Andrew Ku band feeds:

Both show normal cross-pol type OMTs.

Please if anyone has the part numbers referred to above (Model number 678308 and model 61167830c), get in contact with iero@skylogsolutions.com

Best regards, Eric.