Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> HughesNet and Hughes HX VSATs >> Cable hook up https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1257217548 Message started by thebilger on Nov 3^rd, 2009 at 3:05am

Title: Cable hook up
Post by thebilger on Nov 3^rd, 2009 at 3:05am

I just bought a Hughesnet .98m Prodelin system. I didn't get any assembly instructions with it, but after searching the net I think I finally have it put together right. What I need to know is the coax hook up. At the back end of the radio there are two coax jacks labeled AP and IFL. The AP is capped. Then on the outer end near the feed horn there is another coax jack unlabeled.
My question is which goes to sat in and which to sat out on my HN7000?

Title: Re: Cable hook up
Post by USN - Retired on Nov 3^rd, 2009 at 5:22am

The one with two coax jacks is the transmitter, connect IFL to modem Sat Out. AP is a test jack (access port). The one at the other end is on the LNB, connect it to modem Sat In

//greg//

Title: Re: Cable hook up
Post by thebilger on Nov 3^rd, 2009 at 2:43pm

Thank you very much.