Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> HughesNet and Hughes HX VSATs >> High Stream Error Rate https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1267004499 Message started by RubahFox on Feb 24th, 2010 at 9:41am |
Title: High Stream Error Rate Post by RubahFox on Feb 24th, 2010 at 9:41am
Alright, so I've got an HX50 system from a BW reseller. I've verified the dish is peaked up on the correct sat by using a SAM-Lite. The system works for the most part, its been getting a lot of web accelerator errors and streaming applications fail to remain connected. Just noticed yesterday that stream error rate seems a bit high. From watching the status closely, it looks like the stream errors are happening in bursts of about 2-3 seconds at random intervals. The vendor claims its caused by file sharing traffic, which I have since blocked and the problem has not resolved itself. Any suggestions on how I can resolve this issue?
------------------------------------ Network Time: WED FEB 24 09:26:11 2010 ------------------------------------ Adapter Main Statistics: ------------------------ Signal Strength.............. 92 Stream Msg-Ackd/Nakd........ 499172/100728 Flags............... 0x00000000 NonStream Msg-Ackd/Nakd..... 2810/2787 Stream Error Rate....... 16.79% NonStream Error Rate....... 49.79% UpTime (d:h:m:s).. 000:14:26:20 Aloha Starts................ 2814 WakeUp Aloha Starts.......... 5 Ranging Starts.............. 0 Transport Alarm Bit..... 0x0000 Frames Received............. 7037291 Addresses Open............... 7 Frame Errors: CRC/Bad Key... 37/0 Carrier Info....... 021:E:13781 Miscellaneous Problems...... 13 Rate Code........ 256k 4/5 (TC) No Receive Outroute Lock.... 21 Inroute Group................ 1 No FLL Lock................. 467 Inroute...................... 2 No Network Timing Sync...... 3230 IQoS ID...................... 1 Current Modcod............... 8-PSK 8/9 (16) Ranging Reason: Ranging Done Inroute Group Selection: Ranged at inroute rate selected by IQoS Receive Status: Receiver operational. (RxCode 5) Transmit Status: Transmitter ready. (TxCode 8) |
Title: Re: High Stream Error Rate Post by USN - Retired on Feb 24th, 2010 at 11:37am
There are two other threads active at the moment, both working on a similar problem. You might want to follow
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?board=direcway;action=display;num=1266944976 and https://www.satsig.net/cgi-bin/yabb/YaBB.pl?board=direcway;action=display;num=1252906236 They might contain the answer(s) to your issue //greg// |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |