Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Evolution X3 Issue https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1272539371 Message started by Lukio on Apr 29th, 2010 at 12:09pm |
Title: Evolution X3 Issue Post by Lukio on Apr 29th, 2010 at 12:09pm
Hi Guys,
I have X3 that I am playing around with (I'm an Evo virgin!) which is displaying some strange issues. I have taken it out of the box and loaded iDX2.0.1 with a correct options file. I reboot and am able to Falcon in to it with no issues via HyperTerminal. However, I am getting a constant scrolling text - see below (S/N hidden by me with X's for security reasons): [RMT:XXXXX] admin@telnet:::ffff:127.0.0.1;1024 > mlband 1349265000 cal vco[0x62]ni[0x31]nf[0xf2]k[0x3d]g[0x3c]f[0xc2]dlb[0xdc]t1[0x8f]fcck[0xd]lpe] prg lock[0x81]vco[0x62]ni[0x31]nf[0xf2]k[0x3d]g[0x3c]f[0xc2]dlb[0xdc]t1[0x8f]fc] Stv0900Device::FE_StartSearch SFR: Init = 0F2B UP = 8F3E LOW = 8F17 Stv0900Device::FE_StartSearch SFR: Init = 0F2B UP = 8F3E LOW = 8F17 Stv0900Device::FE_StartSearch SFR: Init = 0F2B UP = 8F3E LOW = 8F17 Stv0900Device::FE_StartSearch SFR: Init = 0F2B UP = 8F3E LOW = 8F17 Stv0900Device::FE_StartSearch SFR: Init = 0F2B UP = 8F3E LOW = 8F17 Stv0900Device::FE_StartSearch SFR: Init = 0F2B UP = 8F3E LOW = 8F17 I have reloaded the image and options (inlcuding the Linux BSP) via iSite and also reloaded the options file from HyperTerminal. I am still seeing the same symptoms. I have asked TAC but have had no response yet. If anyone else has experience with an X3 I would appreciate some pointers. The unit is sat on my desk with no RF connections - I was wondering if this may be a reason for it? I have also verified that there isn't a image/options file mismatch. Cheers guys, Lukio. |
Title: Re: Evolution X3 Issue Post by Lukio on Apr 30th, 2010 at 1:19pm
It's Ok guys, this is normal for an Evo. The messages are relating to the fact that it is looking for its rx cxr and is perfectly normal. Once it gets rx lock it will stop ;.)
|
Title: Re: Evolution X3 Issue Post by papayeya on Jun 16th, 2013 at 11:41am
Thank you.
I got this message too and it was repeating every 3 seconds. It was annoying. I thought my Modem was defected so I did recovery :) procedure and it is also didn't help. This is until I read your post and as you said it is normal. I will try to lock it today on the Satellite and see if this message comes again ;) Thank you bro ;) |
Title: Re: Evolution X3 Issue Post by fluffymassive on Jul 8th, 2013 at 5:16am
I can confirm that this is the normal operation for the evolution modems.
Cheers. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |