Satellite Internet forum
http://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> net on but icon grey in iBuilder / iMonitor
http://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1281112617

Message started by Alti on Aug 6th, 2010 at 5:36pm

Title: net on but icon grey in iBuilder / iMonitor
Post by Alti on Aug 6th, 2010 at 5:36pm
Hi Everyone,
I am a Noc operator and am using IDX 2.0.1.0. i am facing this problem recently that the icon of newly added remotes remains grey despite there acquisition into the network. The remotes are showing Rx, Tx, Net led green but the icon in iMonitor and iBuilder statys grey. If i make any change in iBuilder, changes pending icon also doesn't appear. Also don't see any latency in the latency tab in imonitor but i accessed the NMS and it was able to ping the remote LAN and MGMT IP alright.

Does anybody has an idea regarding this issue, how it can be rectified?

Regards,
Ali

Title: Re: net on but icon grey in iBuilder / iMonitor
Post by wbailey on Aug 7th, 2010 at 1:45am
We all have this exact problem. Go into ibuilder and click on the remote - select "Retrieve active configuration from Remote". It'll sync to the PP..

Thank TDMAmike for this one, he re-implanted it in my brain when I was having some problems.

Title: Re: net on but icon grey in iBuilder / iMonitor
Post by TDMAMike on Aug 7th, 2010 at 8:39am
:)

Title: Re: net on but icon grey in iBuilder / iMonitor
Post by Alti on Aug 7th, 2010 at 11:40am
Thanks guys,

Yea, it works

Regards,
Ali

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.