Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> how to monitoring remote site bandwidth using PRTG https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1298893377 Message started by abodawoud on Feb 28th, 2011 at 11:42am |
Title: how to monitoring remote site bandwidth using PRTG Post by abodawoud on Feb 28th, 2011 at 11:42am
Hi,
How can i connected prtg software to my idirect hub to monitoring remote site bandwidth link usage.??? Regards |
Title: Re: how to monitoring remote site bandwidth using Post by DeanFM on Mar 11th, 2011 at 2:31pm
You have to run idirect version 7 and up for that case. Prtg should request with unique OID to each remotes.
Just try snmpwalk to nms server to get those OID's. |
Title: Re: how to monitoring remote site bandwidth using Post by vydrik on Apr 5th, 2011 at 3:07am
there is a document on MRTG monitoring on a TAC website
|
Title: Re: how to monitoring remote site bandwidth using Post by cnjhuapl on Jul 29th, 2011 at 7:13pm DeanFM wrote on Mar 11th, 2011 at 2:31pm:
Can the PRTG do snmp commands? If so how... |
Title: Re: how to monitoring remote site bandwidth using Post by DeanFM on Aug 3rd, 2011 at 5:45am cnjhuapl wrote on Jul 29th, 2011 at 7:13pm:
You can use SNMP custom string sensor in PRTG Network Monitor.. |
Title: Re: how to monitoring remote site bandwidth using Post by cnjhuapl on Aug 3rd, 2011 at 5:15pm
I will try that option Dean
will it allow me to do an snmpwalk on a remote device? |
Title: Re: how to monitoring remote site bandwidth using Post by DeanFM on Aug 4th, 2011 at 5:50am cnjhuapl wrote on Aug 3rd, 2011 at 5:15pm:
I'm afraid you can't do it....idirect only open snmp service on NMS Server. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |