Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> HughesNet and Hughes HX VSATs >> HX 50 ACCESS PROBLEM
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1298988394

Message started by ispeed on Mar 1st, 2011 at 2:06pm

Title: HX 50 ACCESS PROBLEM
Post by ispeed on Mar 1st, 2011 at 2:06pm
DEAR,

PLEASE I CANT LOG IN TO MY HX50 MODEM AGAIN BOTH LAN1 & LAN2. I NEED SOMEONE TO TELL ME HOW TO DO HARD RESET TO FACTORY DEFAULT. THANKS

Title: Re: HX 50 ACCESS PROBLEM
Post by Eric Johnston on Mar 1st, 2011 at 3:40pm
I don't know any way to reset the modem except via the "System Control Centre" screen, so I suggest trying to get your PC to talk to the modem.  Set the PC NIC to automatic for IP address etc..

The LAN1 port of the remote terminal has a default address of 192.168.0.1; the LAN2 port has a default address of 192.168.1.1.

Type 192.168.0.1 into the address bar on your browser.

If the terminal is in its normal working operational state then use the IP address etc provided to you by your service provider.

Here is a source of detailed instructions: https://www.wafa.ae/source/b/wafahxadvanced.zip

Best regards, Eric.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.