Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> the HUB X3 cannot add downstream DVB-S2 https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1317993589 Message started by vsat_new on Oct 7th, 2011 at 2:19pm |
Title: the HUB X3 cannot add downstream DVB-S2 Post by vsat_new on Oct 7th, 2011 at 2:19pm
Dear All,
this is my first time to configure our hub X3 with XLC 11. I already made 2 carrier for downstream ( Downstream SCPC and Downstream DVB-S2 ) I can configure the XLC 11 with downstream SCPC, but when i change to DVB-S2 carrier there is no option for that carrier. What is the problem with my Hub :( Please help, i have to getting online all of our remote this night :( Thanks. Vsat_new |
Title: Re: the HUB X3 cannot add downstream DVB-S2 Post by vsat_new on Oct 12th, 2011 at 10:20am
anybody can help me?
|
Title: Re: the HUB X3 cannot add downstream DVB-S2 Post by Eric Johnston on Oct 12th, 2011 at 10:33am
Why not put all the downstream traffic on one carrier ? The portion of traffic you call SCPC needs to be given dedicated guaranteed capacity in the traffic flow in the router feeding the downstream modulator so that the advertised SCPC bit rate is there all of the time regardless of the actual customer demand.
Best regards, Eric. |
Title: Re: the HUB X3 cannot add downstream DVB-S2 Post by vsat_new on Oct 13th, 2011 at 4:29am
thanks for your reply, sir eric
actually i would like to use DVB-S carrier. But i couldn't push that carrier to HLC carrier. no option on that HLC. But if i used SCPC Donwstream, it showing on the HLC option. Maybe could you send me the manual how to configure the X3 HUB. Please kindly send it to achmad_w@hotmail.com Thanks in advance. |
Title: Re: the HUB X3 cannot add downstream DVB-S2 Post by Eric Johnston on Oct 13th, 2011 at 2:01pm
If you want iDirect hub documentation, training and software get it exclusively from iDirect.
Go to: https://www.idirect.net/Training-and-Services.aspx This is essential in order to maintain the integrity of iDirect VSAT networks. wxw Best regards, Eric. |
Title: Re: the HUB X3 cannot add downstream DVB-S2 Post by Tinel Ritz on Oct 20th, 2011 at 11:24am
Thanks for providing the link Eric..You actually helped me in solving my problem.
|
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |