Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> Hub and VSAT satellite equipment for sale and wanted >> TRIPOD Stand
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1322654877

Message started by yazzdan on Nov 30th, 2011 at 12:07pm

Title: TRIPOD Stand
Post by yazzdan on Nov 30th, 2011 at 12:07pm
I Need Tripod mount folds for compact  transport and assembles quickly with no tools or outside hardware required. Mount has to be 100% hot dipped galvanized.

Please contact me on :

Hasan.irfan@azyansat.om

www.azyansat.om

Title: Re: TRIPOD Stand
Post by satbaja on Dec 1st, 2011 at 1:20am
You are describing the Baird Mount BTD-12 shown here:

https://www.bairdmounts.com/index.cfm

Search BTD-12 in the search window.
They are heavy, about 50 kg so they don't need any ballast.
They are hot dipped galvanized. No tools are required to set up the tripod mount.
They are very easy to level.

Title: Re: TRIPOD Stand
Post by Eric Johnston on Dec 1st, 2011 at 9:01pm
See these two postings below, with pictures, by probecom.  She is a persistant poster of similar information in this forum and I spend a lot of time deleting her duplicate messages.  At least it would be worth you getting prices and delivery costs to your location from China. I'd like to know also. Ask if anyone has one like what you want in your area, so you can go visit and look at it.

1.2m carbon fibre
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?board=Forsale;action=display;num=1300693547

1m carbon fibre
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?board=Forsale;action=display;num=1300931659

I would also suggest 1.2m fly away from Patriot antennas.
https://www.cobham.com/media/15069/data000006_rev003.pdf
But they may have been closed down since they were bought out by Cobham. Not sure ?

Best regards, Eric.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.