Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Idirect 3000 infinity modem stuck on Redboot https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1333610703 Message started by moh.nauman on Apr 5th, 2012 at 8:25am |
Title: Idirect 3000 infinity modem stuck on Redboot Post by moh.nauman on Apr 5th, 2012 at 8:25am
Dear Mike / forum team.
i have received a new modem which have corrupt Linux, as it does not boot in falcon also on redboot we are not able to execute / load the linux, then i tried to recover the modem by doing the following steps but Modem still stuck on Redboot. Kindly do need full by repairing its software. Steps performed. Installation of Linux 1- ZImage E.xtarcted from remote_3XXX-11.0.3.1.pkg file. 2- RedBoot> load -r -b 0x01600000 zImage 3- RedBoot> fis unlock linux 4- RedBoot> fis erase -f 0x50060000 -l 0x00100000 5- RedBoot> fis create -f 0x50060000 -l 0x00100000 -e 0x001600000 -r 0x001600000 -s 0x00100000 Linux 6- Power Recycle the modem. Root FS recovery: 1- Download RootFs.bin for infinity Modem (3000 series) 2- load RootFS.bin -v -b 0x00020000 -r -m tftp -h 192.168.0.2 3- fis create RootFS -b 0x00020000 -l 0x00E80000 -f 0x50160000 -e 0x01600000 -r 0x50160000 after performing these steps modem still stuck on Redboot but now we are able to execute linux by following commands 1- RedBoot> fis load linux 2- RedBoot> exec -c "root=/dev/mtdblock2 console=ttyS1,9600 single" After that Modem is in /# mode Then i tried to recover the modem by installing the following packages (linux_2.4_bsp-11.0.3.1.pkg & remote_3XXX-11.0.3.1.pkg ) and download a good known option file through winSCP. But again i stuck on Red boot every time when modem was rebooted or power recycled. Kindly advise for resolving this problem. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |