Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Difference between iDirect DVB S-2 & INFINITI https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1335333199 Message started by Adnan Nazir on Apr 25th, 2012 at 6:53am |
Title: Difference between iDirect DVB S-2 & INFINITI Post by Adnan Nazir on Apr 25th, 2012 at 6:53am
Hello All,
I was looking all around internet for the technical difference between iDirect DVB S-2 and iDirect INFINITI hubs but i never found any technical difference but i found only the modems and router classification that DVB S-2 uses X series and INFINITI uses 31 series. Anybody please, tell me the technical difference between these both hubs and also mention the applications diffrence. |
Title: Re: Difference between iDirect DVB S-2 & INFIN Post by erico on May 12th, 2012 at 8:19pm
Hello Adams,
The difference between infiniti and Evolution is mainly in the outbound. The Infiniti outbound is based on iDirect iSCPC framing and performance, using TPC encoding. The Evolution outbound is DVB-S2 compliant at both physical and link layer, here you have features like ACM,CCM, with special encoding like BCH+LDPC, leading to better efficiency. the evolution and infiniti inbound are compatible, but evolution inbound has one additional 2D-16 states encoding which will not work in infiniti mode. This sounds like a summary but could find more differenciation elements. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |