Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> HughesNet and Hughes HX VSATs >> Questions on the DC/AC Power Inverter of HX-200 https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1419433433 Message started by John1981 on Dec 24th, 2014 at 3:03pm |
Title: Questions on the DC/AC Power Inverter of HX-200 Post by John1981 on Dec 24th, 2014 at 3:03pm
Hi,
I've few questions related to power inverter DC/AC requirements to power up the HX-200 remote modem. My questions as listed below; 1. What is the wattage requires to operate this remote modem? 2. Does it has peak or surge wattage that will draw a higher wattage than its normal operating wattage rating when first start up? If so, what is the peak wattage? 3. Does it sensitive to squares wave and requires a "perfect sine" wave output from the inverter? Thank you. Regards, John |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |