Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> HughesNet and Hughes HX VSATs >> how to change inroute groups in DNCC, CDS in hughes https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1451975566 Message started by afrose on Jan 5^th, 2016 at 6:32am

Title: how to change inroute groups in DNCC, CDS in hughes
Post by afrose on Jan 5^th, 2016 at 6:32am

can anyone please guide how to change how to change inroute groups in DNCC, CDS in hughes NMS.

Title: Re: how to change inroute groups in DNCC, CDS in hughes
Post by Smann on Jan 13^th, 2016 at 11:43pm

1) is this a HX or HN network?
2) What version of the Vision client OR Expert NMS are you currently running?

Title: Re: how to change inroute groups in DNCC, CDS in hughes
Post by afrose on Sep 6^th, 2016 at 10:02am

1) it is HX netwrok
2) NMS is HP proliant DL 360 with version 8.2.1

sorry for delay smann..

Title: Re: how to change inroute groups in DNCC, CDS in hughes
Post by Smann on Sep 11^th, 2016 at 3:50am

I have PMed you information.
I'm not sure if you where looking to change a terminals IRG (inroute group) or make changes to the group itself, such as add a new inroute to the group. but have provided information on both.

If you are looking to make changes to the group itself, I warn you these changes will cause hits to your network. And all preparations and precautions should be taken prior to attempting any changes.