Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Why are Direct X1 LEDs flashing ? https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1527436037 Message started by Admin1 on May 27th, 2018 at 4:47pm |
Title: Why are Direct X1 LEDs flashing ? Post by Admin1 on May 27th, 2018 at 4:47pm
Someone has asked me:
I have an X1 modem whose RX, NET and TX lamps flash at the same time in green. The 1.8 m antenna is well aligned on xx in a site with latitude xx and longitude xx. The RG6 cables are good quality and measure 30 m. The power supply is stabilized and the temperature is below 50 ° C. This modem has worked well for over a year before, and suddenly this change took place. What can be the cause? The down C/B varies continuously between 12 and 6 dB, while the Tx Pwr is -24 dBm. Does anyone have any ideas ? Best regards, Eric. |
Title: Re: Why are Direct X1 LEDs flashing ? Post by Admin1 on Jun 3rd, 2018 at 3:43pm
Mt attention has been drawn to this blog:
https://satoms.com/idirect-vsat-modem-flashing-net-light/ I'm back on the internet now and hope to make more considerations over next few days. Eric. |
Title: Re: Why are Direct X1 LEDs flashing ? Post by Gigi on Jul 26th, 2018 at 5:48pm
Thank you
Helpfull. I will tell you ! |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |