Satsig logo
Satellite Broadband Forum.
Welcome, Guest. Please Login
Welcome to this satellite broadband discussion forum.† Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure.† Both service providers and customers are encouraged to contribute.† Click Register at the bottom if you want to join. Read the Forum rules.
  HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Problem: HX 150 connected to non-Hughes BUC (Read 1597 times)
Alkan CIT
Senior Member
***
Offline



Posts: 72
Problem: HX 150 connected to non-Hughes BUC
Mar 25th, 2009 at 12:16pm
 
Hey..
I am currently connecting my HX 150 to a terrasat 10 IBUC C-band to a  stabilized antenna, and itís not working .

I tried to connect my IBUC to a comtech modem , it works fine.
Do any one have any experience in connecting HX 150 modem to non- hughes BUC?.
Please advice.
Back to top
 

Email:abdoulla.elgazzar@alkancit.com&&www.alkancit.com
WWW  
IP Logged
 
satlover
Member
**
Offline




Posts: 1
Re: Problem: HX 150 connected to non-Hughes BUC
Reply #1 - Apr 1st, 2009 at 10:50pm
 
May be BUC is inverting the carrier. Check with them to see if they can handle spectral inversion.
Back to top
 
 
IP Logged
 
Nzukuna
Member
**
Offline




Posts: 1
Re: Problem: HX 150 connected to non-Hughes BUC
Reply #2 - Jul 2nd, 2009 at 10:12am
 
I had a similar problem with the same set up and what I realised is that the HX 150 does not supply the BUC with DC power.We did several tests and realised that the Terrasat IBUC was doing a spectral inversion after we sourced for an external power supply. Check inversion and it will work.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
 
Anytime you want to order from Amazon...
If in Americas, please use the link below:

Useful links:
My latitude longitude (lat/long) finder
Email me: eric@satsig.net
Anytime you want to order from Amazon...
If in Europe, please use the link below: