|
Author |
Topic: Download iSite software for iDirect (Read 65826 times) |
|
alol
Member
Email
Posts: 8
|
|
Download iSite software for iDirect
« on: 20. Sep 2006 at 13:44 » |
Quote | Modify
|
Hi
I ask your help mr. eric. I am in need to the iSite software to download the option file to my iDirect 3000.
Either send me the software or give a link to it.
Thanks a lot.
|
|
|
|
|
Admin1
YaBB Administrator
Posts: 621
|
|
Re: Download iSite software for iDirect
« Reply #1 on: 20. Sep 2006 at 14:19 » |
Quote | Modify
|
Try these
download iSite satellite pointing software v. 6.0.9
http://www.mobilsat.com/Satellite-internet-downloads/
Please be aware of danger of virus etc in any downloaded software. Also, if you affect the firmware, your modem may become unusable. Read any documents and instructions from your service provider first.
Best regards, Eric
|
|
|
|
|
alol
Member
Email
Posts: 8
|
|
Re: Download iSite software for iDirect
« Reply #2 on: 20. Sep 2006 at 17:03 » |
Quote | Modify
|
Thanks alot Eric you are so generous and helpful.
god bless u
thanks alot.
|
|
|
|
|
karibe048
Member
Email
Posts: 8
|
|
Re: Download iSite software for iDirect
« Reply #3 on: 17. Sep 2007 at 22:59 » |
Quote | Modify
|
if you modem have a newer version it won't work
there are newer release than those ...
7.0 .0.2 and 7.1.1 ver 8 just came out .
7.1.1 is the best isite so far... problem can not log but i can telnet resolved
hope this help
Charlie
|
karibe048
charliecuattro@yahoo.es
|
|
|
jaydifox
Member
Email
Posts: 1
|
|
Re: Download iSite software for iDirect
« Reply #5 on: 05. Nov 2007 at 12:26 » |
Quote | Modify
|
I was just wondering if i can align my antenna with isite v.7.1.1
|
|
|
|
|
Eric Johnston
Member
Posts: 2528
|
|
Re: Download iSite software for iDirect
« Reply #6 on: 05. Nov 2007 at 13:04 » |
Quote | Modify
|
To align your dish:
Set the polarisation accurately by calculation.
Set the elevation accurately by calculation.
Find the satellite by swinging boldly in azimuth. iSite will show increasing power and once the correct carrier is locked (and therefore correct satellite also) it will go green on the graph. This presumes you have the correct config file loaded, with the downlink carrier frequency and symbol rate.
Peak up in azimuth and elevation to the exact centre of the beam. You need the PC at the dish so you can make 1/6th turn adjustments to the nuts and record each measured value, set to the exact centre.
Best regards, Eric.
|
|
|
|
|
pgannon
Member
WWW | Email
Posts: 156
|
|
Re: Download iSite software for iDirect
« Reply #7 on: 05. Nov 2007 at 16:27 » |
Quote | Modify
|
I fail to understand a request on a public forum for iSite software to download an options file.
As others have noted, you must have the correct version of iSite, and it must match the operating system your network operator is supporting on their iDirect hub. The network operator should supply you with both the current version of iSite as well as the options file, and any firmware updates that might be required.
Shopping for these items on your own and guessing at what versions you should have on your iDirect modem is a recipe for frustration and failure.
I see these requests for this basic information from time to time. If you have chosen a network operator to deliver services to you, and your operator can not make these items available, then you have made a mistake and you need to select a more experienced network operator. If you can't even get current software, then what help will your operator be when you have a problem - assuming you are able to get your site commissioned in the first place?
Pat
Business Satellite Solutions, LLC www.bsatellite.com
|
|
|
|
|
TDMAMike
Member
Email
Posts: 839
|
|
Re: Download iSite software for iDirect
« Reply #8 on: 06. Nov 2007 at 00:20 » |
Quote | Modify
|
Agree with Pat, if you are paying for a service, hold your provider responsible for getting it to you. If they cant deliver, change service providers.
|
Regards,
M
|
|
|
ahmelect
Member
 
Email
Posts: 66
|
|
Re: Download iSite software for iDirect
« Reply #9 on: 29. Dec 2007 at 19:46 » |
Quote | Modify
|
hi all
any one help us with the link of the last Version of iSite?? and one have iMoniter? how can we use it?
|
Ahmed
Dar Al-Hikma
|
|
|
TDMAMike
Member
Email
Posts: 839
|
|
Re: Download iSite software for iDirect
« Reply #10 on: 29. Dec 2007 at 21:43 » |
Quote | Modify
|
Both softwares (iSite/Monitor) are controlled clients (by iDirect and most HNOs) and further you will need login credentials to use them.
It is doubtful that anyone has openly hung the latest version of iSite (8.X) on the Internet. You certainly wont see iMonitor on the open Internet either (it is even less likely).
Pat (pgannon) above pretty much said it best, if you want to use something such as that, it is recommended to go through your ISP and request permission (as you will need their permission (anyway) to use such a tool.
I don’t know of many NOs that are even running 8.X. I think the implementation of GQoS has slowed them in pushing 8.X to the customers. It is a fairly advanced QoS, and it will take them some time to field it appropriately (to prevent the complaint department from filling up)
|
Regards,
M
|
|
|
abi
Member
Email
Posts: 3
|
|
Re: Download iSite software for iDirect
« Reply #11 on: 22. Jan 2008 at 10:26 » |
Quote | Modify
|
Hi all,
I have iSite 6.0.9, one of my modem is not locking to the satellite. The option file is correct, the LNB, cables are fine. I got advice that try to reinstall the package and images. But I dont have the packages and image files for iDirect 3100 modem version 6.0.9. Anybody can help ?
|
|
|
|
|
janewanjiru
Member
Email
Posts: 40
|
|
Re: Download iSite software for iDirect
« Reply #12 on: 22. Jan 2008 at 10:39 » |
Quote | Modify
|
Hi abi,
Contact your provider - find out what version of iSite they are running on the hub. Otherwise you will get very frustrated.....and besides, they should be helping you......
|
|
|
|
|
TDMAMike
Member
Email
Posts: 839
|
|
Re: Download iSite software for iDirect
« Reply #13 on: 22. Jan 2008 at 11:42 » |
Quote | Modify
|
on 22. Jan 2008 at 10:26, abi wrote:Hi all,
I have iSite 6.0.9, one of my modem is not locking to the satellite. The option file is correct, the LNB, cables are fine. I got advice that try to reinstall the package and images. But I dont have the packages and image files for iDirect 3100 modem version 6.0.9. Anybody can help? |
|
Is the modem configured for Fixed Site (read: Geo hardcoded) or Mobile Remote (read: you have an onboard GPS providing NMEA sting)?
|
Regards,
M
|
|
|
Lukio
Member
Email
Posts: 29
|
|
Re: Download iSite software for iDirect
« Reply #14 on: 22. Jan 2008 at 14:57 » |
Quote | Modify
|
Hi Abi,
From what you are describing do you mean that you can't get receive lock on the NM?
If so, have you checked that the antenna alignment is correct? Try using the antenna alignment program in iSite and see what voltage you are getting from the LNB.
Also, check that you have the LNB parameters set correctly in the option file. What model LNB are you using?
If you can provide more details I may be able to help.
Thanks ;.)
|
|
|
|
|
|
