Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

telnet password unlock

(Read 25806 times)
Ex Member
Ex Member


Dec 7th, 2004 at 8:08am  
we are trying to reset the password on a linkstar terminal. We made a serial cable to rj11 connection from a PC to the linkstar but could not still establish a connection.
We think we need a host name for this and possibly have not got the procedure well
Please we need your help and suggestions
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #1 - Dec 8th, 2004 at 1:18pm  
pls try to be more expilicit.
did you connect a cross over cable to the linkstar modem and convert the macaddress well enough.
Please bear in mind that most recent product line of the RCST uses the following default ip add to telnet into the RCST 10.1.-.- unlike the former 10.0.-.-. take caare of this to know if it can solve ur problem.
But you can explain what you want to achieve in details so we can know a way to help.

Nnaemego Obiora
234-8045042224
nnaemego@yahoo.co.uk
Back to top
 
 
IP Logged
 
Fudskie
Guest


Reply #2 - Dec 8th, 2004 at 11:57pm  
LINKSTAR Modem - Password Unlock
Telnet Password Unlock Procedure

If you have forgotten your password for full Telnet Access, please use the following sequence and procedure to unlock the system. If your unit is under a lease agreement you may not be authorised to do this, doesn’t apply to owned devices. Make one of these cables, and open the RCST. Inside there is a serial connector to which you can connect using this cable decribed below.

Once you connect, you can get direct access, and use the
passwd -u root -p newpassword command to reset it.


Linkstar Serial Cable

Only the middle 4 pins are used (use a 4 pin connector phone plug) Looking at the phone plug with the clip facing away from you.


pin 1 goes to pin 5 on the serial connector
pin 2 goes to pin 2 on the serial connector
pin 3 goes to pin 3 on the serial connector
pin 4 not used

some loopbacks on the serial connector

7 and 8 are looped
1 and 4 are looped
6 and 4 are looped

Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #3 - Dec 29th, 2004 at 3:46pm  
I will also help if you provide us several other further informations.
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #4 - Jan 6th, 2005 at 7:11pm  
Hello,

Please be sure to have my support if you need one. we have unlocked several modems many times.

Regards'

Ben
Back to top
 
 
IP Logged
 
madmax
Guest


Reply #5 - Jan 9th, 2005 at 4:05pm  
hi every one i need help please
my linkstar from yesterday dont work
it's only show me the power led
no tx rx or ethernet work !!!!
what' happen and how i can resolve this problem
NB: i have unlocked this linksat since 3 moth ago and it work correctly

if there any flsh procedure or any procedure to reset to a factory setting i need a fast help please
Back to top
 
 
IP Logged
 
maliksat
Guest


Reply #6 - Jan 12th, 2005 at 11:02pm  
hi

i would to unlock my linkstar but i dont know where i put my cable .because when i  have open trhe terminal i have found many port  tahnks.
Back to top
 
 
IP Logged
 
Ben
Guest


Reply #7 - Jun 20th, 2005 at 4:46pm  
Hello Linkstar Unlock,

Please put your name next time.

Where are you located, I could get some local engineers to help you fix the rcst.

Ben
Back to top
 
 
IP Logged
 
Ezdeen
Guest


Reply #8 - Jun 23rd, 2005 at 8:54pm  
hi

I am trying to open Linkstar modem but I could not

I log in as guest and I can not change the setting of the modem

by the way I tried the COM-->RJ11 cable connection and it did not work AND THE Connection of the pin as following

COM                       RJ11
Pin 5                        Pin 1
Pin 2                        Pin 2
Pin 3                        Pin 3
not connectrd          Pin4

and I used 4 pin telephone plug
   
when I connected them and switch on the modem it started to read but I could not type any thing after that

I have a copy from the responce of the modem if you want me to send it to you

Please could you help me and if you have an software can you please send to me

Thanks alot

Ezdeen
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #9 - Aug 14th, 2005 at 10:05pm  
Dear Sir

I need telnet command for UNlock Linkstar password

Bast Regards
Back to top
 
 
IP Logged
 
Ghost
Guest


Reply #10 - Aug 17th, 2005 at 9:00pm  
The command is: passwd [old password] [newpassword]

but be aware to log in as as admin the change it


Regards
Back to top
 
 
IP Logged
 
lawrence oka
Guest


Reply #11 - Dec 3rd, 2005 at 9:17pm  
Quote:
Dear Sir

I need telnet command for UNlock Linkstar password

Bast Regards

Back to top
 
 
IP Logged
 
Iraq Internet Guy
Guest


Reply #12 - Jan 30th, 2006 at 3:26pm  
Just so everyone knows for future reference. When the instructions tell you to LOOP the wires it means to LOOP the wires. The programing will not work properly unless it reads the connections as they are suppost to be.
Learned From Mistake!
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #13 - Feb 5th, 2006 at 2:01pm  
I know how to unlock the link star terminal.

I have the cable and the commands.

If you need more, contact me at: info.afghanictsolution@gmail.com


thanks
Back to top
 
 
IP Logged
 
sagir
Guest


Reply #14 - Mar 14th, 2006 at 9:58am  
plz help to know how to full telnet and unblock a linkstar modem
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #15 - Oct 24th, 2006 at 7:25am  
Dear Friends,

We offer to unlock your LinkStar terminals from teleport side. Just direct your terminal to W3A and inform us about its MAC address.

We will definitly release it easily.

Regards
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #16 - Nov 8th, 2006 at 9:31pm  
I found out that you had some problem in December 2004 unlocking a linksat modem, I want to know if you're able to resolve the problem, and if you did, how?

I had a linksat modem, that I purchased from an ISP, I was able to unlock the RCST, but I can not get the modem activated by my new ISP, we're now thinking that maybe this first ISP have a PIN on the modem, which sounded like what you went through in 2004.

Please if you're able to resolve the problem, or you know how we could resolve the problem.

I would be obliged if you could give me any assistance to finally complete the unlocking of the modem to be able to use it.
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #17 - Nov 21st, 2008 at 12:51pm  
Hello,

I think everyone's problems are sloved because i can unlock your linkstar modems locked by the ISP or from your old ISP. it is not a problem just email: acue_links@yahoo.com or call 234-7064801198

Note: We are here to help you fix your problems, also note that we unlock a mac once. Try to be good so that your modem will not be lock next time.
Back to top
 
 
IP Logged
 
Pages: 1