Advertisment:

Broadband via satellite

Advertisment:

Worldwide satellite services from Ground Control Company

Satellite Internet Forum.

Welcome, Guest. Forum rules.

Home Login Register

Satellite Internet forum › Exede satellite broadband forum (was Wildblue) › Frequency Settings for Ka band

Pages: 1

Send Topic | Print

Frequency Settings for Ka band

(Read 9905 times)

Ex Member Ex Member	May 26^th, 2006 at 3:39pm I'm currently in the eastern arctic, and have our new Raven 65 X 75cm dish, and am having a hard time locating Anik F2. What settings should be used on the spectrum analyser, to detect this ka band?
Back to top	IP Logged

USN - Retired YaBB Moderator ★★★★★ Offline Posts: 837 Kentucky (USA)	Reply #1 - May 26^th, 2006 at 8:22pm Can't answer for sure without your lat/long. But if you're above 60N and east of 111W, there is no viable line of sight to Anik-F2 //greg//
Back to top	USN (Ret) IP Logged

Ex Member Ex Member	Reply #2 - May 26^th, 2006 at 10:39pm I'm @ 68.46 North, and 81.14 west. Some say the signal should be fine, some say no. Maybe with the BirdDog sat finder, it may be easier to locate.
Back to top	IP Logged

USN - Retired YaBB Moderator ★★★★★ Offline Posts: 837 Kentucky (USA)	Reply #3 - May 26^th, 2006 at 11:20pm Anik-F2 is at 111W. Your Azimuth will be ~211.8 (true) or ~250.1 (magnetic). Elevation is ~10.2, skew is ~11.2 L-band frequency range associated with Ka-receive is identical to Ku-band; 950 to 1450 MHz, but polarization is circular. //greg//
Back to top	USN (Ret) IP Logged

Pages: 1

Send Topic | Print

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.