Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

LinkStar Site Installation Procedure

(Read 6403 times)
Ex Member
Ex Member


Apr 24th, 2007 at 11:58am  
Hello All,

I am newly registered to this forum. I must say i am impressed with the level of resources available on this site/forum.

I am just about to start activating linkstar modems on the Mweb Platform. Can anyone help me with an itemised sequence/procedure to follow during installations of new sites.
Any other related information on site activation will be highly appreciated.

Best regards

Hammajam,
Yola.
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
★★★
Offline



Posts: 2109
Reply #1 - Apr 24th, 2007 at 12:26pm  
The box for the LinkStar modem normally contains a large glossy quick reference installation guide.
See here: https://www.satsig.net/linkstar/link-star-install-glossy.pdf   693k bytes

There is a more substantial installation instructions manual available from your service provider.
See here:  https://www.satsig.net/linkstar/linkstar-vsat-rcst-installation-manual-2005.pdf  1909k bytes

In both cases this may not be the latest version.  Note the large file size before downloading.
wxw
Best regards, Eric.
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #2 - Apr 24th, 2007 at 3:54pm  
Thank you so much for the guide Mr Eric.
I am presently going through both resources and i am finding it intresting.

Thank you so much.

Hammajam
Back to top
 
 
IP Logged
 
afri-sat.com
Member
★★
Offline



Posts: 5
Hamburg - DE
Reply #3 - Jun 30th, 2009 at 10:04am  
Dear Hammajam,


on our afri-sat company website we published a short step by step guide including the typical modem configuration and the typical setup process for customers:
https://www.afri-sat.com/coverage/ku_spot_is_14/get_started_is_14/

These page shows the public IP setup with the Linkstar terminal:
https://www.afri-sat.com/support/configuration/ip_setup/

This are just examples for you - but they should work with the regarding modified parameters (Frequency, Polarity, IPs etc.) with any other Linkstar broadband provider.

You will get these parameters from your ISP.

hth
good luck and
best regards,


Niels.
Back to top
« Last Edit: May 27th, 2010 at 10:10am by afri-sat.com »  
WWW  
IP Logged
 
Pages: 1