Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Connection slow or not working

(Read 8923 times)
Ex Member
Ex Member


Sep 19th, 2007 at 1:28pm  
We had our Wildblue satellite installed April 2007 and nothing worked right.  After numerous calls, the retailer installed the entire system again.  After that, speeds were slower than dial up and it wouldn't stay connected.  They installed another modem and that helped but we still lost connection at least 6 times a day.  Numerous tech's from DishNetwork/Wildblue have been here doing different things.  Our speeds are better on upload and download but opening web sites is still the same as dial up.  Now, every evening between 7:00-11:00 pm it's impossible to use our pc because nothing will open, no incoming or outgoing email.  Hughes sends a tech during the day when everything is working ok but won't send one in the evenings when the problem occurs so they say nothing is wrong.  I even had all 3 of our pc's checked by a certified tech because they said it was our pc's.  Nothing was found wrong with any of the pc's.  This is the 9th day of not being able to use our pc's in the evening.  Does anyone have any idea of what could be wrong????  Thank you.
Back to top
 
 
IP Logged
 
USN - Retired
YaBB Moderator
★★★★★
Offline



Posts: 837
Kentucky (USA)
Reply #1 - Sep 20th, 2007 at 4:37am  
Could be any number of things; from hardware at your end, to a mispointed dish, to an overcrowded gateway. But everything I'd offer at the moment would be a guess - without actually reviewing your SVT numbers. Were any of those "numerous techs"  considerate enough to leave you the most recent set?

If the answer is no, call Wildblue tech support as soon as you experience the next of these major slowdowns. Ask specifically for them to look at your SVT values. Ask what they are so you can copy them down on paper.

Have you tried taking the router out of the configuration, and see how the connection performs with just one PC hooked up directly to the Surfbeam?

//greg//
Back to top
 

USN (Ret)
 
IP Logged
 
Ex Member
Ex Member


Reply #2 - Sep 20th, 2007 at 10:43am  
They have installed the entire system twice, realigned the dish again two days, ago and we have had only one pc connected for over a month.  The numbers are ok during the day, the problem is from 7 pm to 11 pm every night.  No tech has ever left the numbers but I will call tonight when I can't use my pc for anything and get the numbers.  I think it's a crowded Gateway because they over-sold.  Thanks for your reply.
Back to top
 
 
IP Logged
 
USN - Retired
YaBB Moderator
★★★★★
Offline



Posts: 837
Kentucky (USA)
Reply #3 - Sep 20th, 2007 at 3:06pm  
It will also help me to know your location and your beam assignment. You might be in a beam overlap area. If one or both or the "repoints" didn't involve the use of an APA (a proprietary test device used to filter out all but your assigned frequency),  you could be locked on to the wrong beam - or even to a side lobe of the assigned beam. Combined with the SVT numbers, that info can help paint a better picture.

//greg//
Back to top
 

USN (Ret)
 
IP Logged
 
Ex Member
Ex Member


Reply #4 - Feb 14th, 2008 at 4:07pm  
I had trouble with my beam location as well. It would come on and then go off for no reason. I had to get onto tech support so many times that it was unbelievable.
Back to top
 
 
IP Logged
 
Pages: 1