Home page of Satellite Internet and Information

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Both service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask question. Read the Forum rules.
      Satellite Internet Forum : Home Page          
Pages: 1

Monitoring of Bandwidth link Usage at Remote

(Read 2911 times)
Ex Member
Ex Member


Oct 14th, 2008 at 4:53pm  
Hi,

Can we monitor the link bandwidth usage at remote station by telnet into the iDirect router and check?

Any commands to check that?

Best Regards,
wOw
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #1 - Oct 14th, 2008 at 5:07pm  
Do you have access to iSite on your specific modem? 

If so, you could use it to see IP STATS on your modem.......but you would not be able to see utilizations/stats on the carriers themselves.  So, in a nutshell you could see your stats....which may be of little use to you.



Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #2 - Oct 14th, 2008 at 5:15pm  
Hi,

I have iSite but i think iSite is not for monitoring purpose except doing antenna pointing. Like checking the rx snr, need to telnet in to check.

So there is no commands like "rx snr" to check on the link bandwidth usage ?

Best Regards,
wOw
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #3 - Oct 14th, 2008 at 5:31pm  
The same telnet password that you use to log into the box and run the rx snr command (from the command line) is the same password you use to log in with iSite.  Once in with iSite you can pull down the main menu and select IP STATS.  Keep in mind, these statistics are for your modem only. 
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #4 - Oct 13th, 2010 at 8:19pm  
by using iMonitor, you can point to the desired remote station  right-click on it. then choosing ( long  term bandwith usage). bandwidth used will displaying to ya.
Back to top
 
 
IP Logged
 
Pages: 1