Satellite Internet

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Both service providers and customers are encouraged to contribute. If you are showing as 'Guest', please register at the bottom of this home page if you wish to contribute or ask question. Read the Forum rules.
      Satellite internet forum          
Pages: 1

iDirect Boot problem

(Read 3664 times)
Space
Ex Member


Mar 26th, 2009 at 2:02am  
When i boot my Infiniti 3100 modem, i get the following Error. When i press space bar 4-5 times, i get Kernel Panic message then the modem freezes.

Have a look at the error and advice me the way forward, thanks in advance.

Regds
Space

RedBoot> DRAM Test      ................
DRAM Test Successful
+Ethernet eth0: MAC address 00:60:43:00:00:00
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.2
Default server: 192.168.0.2

RedBoot(tm) bootstrap and debug environment [ROM]
release, version "iDirect 1.1" - built 16:16:40, Apr 29 2005

Platform: iDirect iDS Platform (XScale)
Copyright (C) 2004, 2005  iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
== Executing boot script in 5.000 seconds - Press <Space Bar> to abort
RedBoot> fis load Linux
RedBoot> exec
Using base address 0x01600000 and length 0x00100000
Uncompressing Linux.............................................................
...... done, booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@gimli) (gcc version 3.3.2) #1 Sat Apr 12
14:56:34 EDT 2008
CPU: XScale-IXP4xx/IXC11xx revision 1
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS1,9600 root=/dev/mtdblock2
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62572KB available (1678K code, 471K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x00fe0000 : "RootFS"
0x00fe0000-0x00fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
0x00fff000-0x01000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary -- forc
e read-only
0x00fe0000-0x01000000 : "FIS Overlap"
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/proje
cts/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
/bin/sh: can't access tty; job control turned off
/ #
Back to top
 
 
IP Logged
 
Zoulou23
Ex Member


Reply #1 - Nov 2nd, 2015 at 8:51am  
Dear all,

I have same problem, i have domaged my idirect evolution x3 while atempting to recover it. File missing is lunix and rootfs please help me with procedure to recover and make it Alive again.

My e-mail adresse:ndeopatrick@gmail.com
Back to top
 
 
IP Logged
 
Pages: 1