Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
  Satellite Internet forum › iDirect Forum: hubs and terminals › I can't connect to modem via Console
Pages: 1

I can't connect to modem via Console

(Read 2391 times)
VbGuy
Member
★★
Offline



Posts: 23
Sep 17th, 2009 at 9:32pm  
Hello Dear/Sir

I have iDirect 3100 modem with 8.0.2.7 package

Simple I can't connect to my modem via console port using RJ-45 to DB-9 cable.

The console showing nothing.

The modem working very good but no connection on console port

Do you have any idea ?
Back to top
 
 
IP Logged
 
Ex Member
Ex Member
Reply #1 - Sep 17th, 2009 at 10:15pm  
3100 modem?

1.  Layer one good?  (that cable?)
2.  Is your hyperterm configured correctly? 9600 or 4800 8N1?

Look at your options file and determine the console port speed and make sure your hyperterm reflects that - 9600 or 4800.  8.0.2.7 Reboot and falcon are 9600 unless they have been changed (in redboot or falcon).
Back to top
 
 
IP Logged
 
VbGuy
Member
★★
Offline



Posts: 23
Reply #2 - Sep 17th, 2009 at 10:31pm  
Thanks alot,,,

I will give it try ...

I have original Cisco cable with the correct pinsout...

But do I have to see light of console lamp  ?

Can the console be turned off from option file ?
Back to top
 
 
IP Logged
 
Ex Member
Ex Member
Reply #3 - Sep 18th, 2009 at 3:00am  
No, but the port speed can certainly be changed onced Falcon loads.  It changes to what they have configured in the options file. 

Back to top
 
 
IP Logged
 
VbGuy
Member
★★
Offline



Posts: 23
Reply #4 - Sep 18th, 2009 at 4:26pm  
I tried the following speed :
2400
4800
9600
19200
115200
But nothing worked .

I can't find anything related to console port in Option File .

Is there any section specified for Console (Section name) '[.....]' ?
Back to top
 
 
IP Logged
 
fluffymassive
Senior Member
★★★
Offline



Posts: 67
SA. Australia
Reply #5 - Oct 20th, 2009 at 2:06am  
It will be in [MOBILE] if the remote is set to mobile and not static. Else it will be the 9600.
Back to top
 
 
IP Logged
 
Pages: 1

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy   Forum User Agreement   Forum rules   Cookie policy.