Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Cable hook up

(Read 2788 times)
thebilger
Member
★★
Offline



Posts: 4
Nov 3rd, 2009 at 3:05am  
I just bought a Hughesnet .98m Prodelin system. I didn't get any assembly instructions with it, but after searching the net I think I finally have it put together right. What I need to know is the coax hook up. At the back end of the radio there are two coax jacks labeled AP and IFL. The AP is capped. Then on the outer end near the feed horn there is another coax jack unlabeled. 
My question is which goes to sat in and which to sat out on my HN7000?
Back to top
 

Hook it up!
 
IP Logged
 
USN - Retired
YaBB Moderator
★★★★★
Offline



Posts: 837
Kentucky (USA)
Reply #1 - Nov 3rd, 2009 at 5:22am  
The one with two coax jacks is the transmitter, connect IFL to modem Sat Out. AP is a test jack (access port). The one at the other end is on the LNB, connect it to modem Sat In

//greg//
Back to top
 

USN (Ret)
 
IP Logged
 
thebilger
Member
★★
Offline



Posts: 4
Reply #2 - Nov 3rd, 2009 at 2:43pm  
Thank you very much.
Back to top
 

Hook it up!
 
IP Logged
 
Pages: 1