Advertisment:

Broadband via satellite

Advertisment:

Worldwide satellite services from Ground Control Company

Satellite Internet Forum.

Welcome, Guest. Forum rules.

Home Login Register

Satellite Internet forum › iDirect Forum: hubs and terminals › Telnet iDirect Modem !

Pages: 1

Send Topic | Print

Telnet iDirect Modem !

(Read 4658 times)

yazzdan Member ★★ Offline Posts: 47	Jun 11^th, 2010 at 1:35pm Hello All, I Have a question that when i telnet the iDirect modem from iMonitor ; let say i am using 192.168.1.4/30 Pool � Modem Ip = 192.168.1.5 Router Ip = 192.168.1.6 Why the iDirect modem is not pinging the router ip from device from the iDirect modem as it is physically connected to the router ??? P.S. packets are untagged and are without VLAN.
Back to top	« Last Edit: Jul 2^nd, 2010 at 9:21am by Admin1 » Regards,&&Syed Irfan Hasan&&iDirect & VSAT Engineer WWW IP Logged

fluffymassive Senior Member ★★★ Offline Posts: 67 SA. Australia	Reply #1 - Jun 28^th, 2010 at 3:20am Does the router allow ping replys? does the link on the router say UP UP? does the modem see the link? I.e No LAN DISCONNECTED alarms?
Back to top	IP Logged

1505 Member ★★ Offline Posts: 21	Reply #2 - Jul 1^st, 2010 at 9:19am IP Routing OK?
Back to top	YIM IP Logged

yazzdan Member ★★ Offline Posts: 47	Reply #3 - Jul 2^nd, 2010 at 7:33am i Need to ping From iDirect Modem ... Router is Up and link is working fine , all the connectivity shows by iMonitor but when i telnet the iDirect Router and ping the next device (Cisco ROuter) is not going to ping ..
Back to top	Regards,&&Syed Irfan Hasan&&iDirect & VSAT Engineer WWW IP Logged

1505 Member ★★ Offline Posts: 21	Reply #4 - Jul 4^th, 2010 at 8:54am Have you tried using RIPv2 in your routing protocols? Regards.
Back to top	YIM IP Logged

Pages: 1

Send Topic | Print

Email me: eric@satsig.net

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.