Home page of Satellite Internet and Information

Satellite Internet Forum.

Welcome, Guest.
Welcome to this satellite broadband discussion forum. Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure. Both service providers and customers are encouraged to contribute. Register at the bottom of the forum home page if you wish to contribute or ask question. Read the Forum rules.
      Satellite Internet Forum : Home Page          
Pages: 1

iDirect X3

(Read 3210 times)
Ex Member
Ex Member


Jul 6th, 2010 at 10:14pm  
Hi Eric

I am Presently working on iDirect evaluation X3 modem. m unable to login to modem through iSite or telnet, only posibe way is hyper terminal.

how can i resolve this issue ?
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
***
Offline


Personal text from Profile,
Options, Top line

Posts: 2109
Reply #1 - Jul 6th, 2010 at 11:30pm  
I'm not really the person to ask I have never worked with iDirect, so maybe others can help.

As I understand it, for ethernet connection, you need your PC connected directly to the modem.  Don't try via a LAN/router etc.

For serial communications you will need to get set bit rate, stop bits, data bits and parity correct.  I don't have the manual to hand.

Best regards, Eric.
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #2 - Jul 8th, 2010 at 8:10pm  
Can you give more info? 
Unable to login through iSite/Telnet could be due to the password in the options file. 
The Linux level password and the iSite/Telnet passwords can be set independently.
Back to top
 
 
IP Logged
 
Ex Member
Ex Member


Reply #3 - Jul 20th, 2010 at 10:50am  
hello,
as you mention that you unable to login to x3 evolution
if your password is correct and you connected to the modem then there is a problem with option file or with the pakg  mostly if the o/f is not for a pakg that not able to login .. conform the akg and find a option file for that and load it via hyperterminal .. hope its work

regards,
Noor
AFSAT com  www.afsat.net
www.afghancyber.com
Back to top
 
 
IP Logged
 
Pages: 1