Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

How to Site VSAT Antenna - Rx/Tx antenna

(Read 1465 times)
antesky
Member
★★
Offline



Posts: 30
Apr 14th, 2011 at 10:16am  
The VSAT (Very Small Aperture Terminal) is a telecommunication system based on wireless satellite network. Although it is easily implemented due to the wireless nature of connectivity, a critical issue that cannot be ignored during a VSAT installation is how to prepare the vsat antenna site.
In order to achieve maximum performance of your antenna system, it is important to select the correct location for the antenna .The following guidelines should be observed when selecting a site for the installation.
Firstly, the vsat antenna site should have a clear unobstructed view to the satellite, so it should be clear of any obstructions, such as trees or buildings.
Secondly, the site should be relatively flat and level for ease of installation and access to the antenna.
Thirdly, the site should be checked for underground obstruction, such as buried cables or pipes.
Fourthly, all local building codes should be adhered to (such as grounding, foundation requirements, zoning rules, set backs, etc)
More over, the antenna site must be positioned conveniently close to the main building that will house the electronics and provide the electrical power to the antenna.
About Antesky
Antesky Science Technology Inc.  is specially engaged in designing, manufacturing and installing satellite communication antennas and relevant servo equipments. We can offer a complete line of earth station antenna products and systems, such as VSAT antennas, Tx/Rx antennas, TV receive only antennas, satellite news gathering Antennas, Flyaway, antenna control system and tracking system.
https://www.antesky.com/
Back to top
 
 
IP Logged
 
Pages: 1