Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Probecom 6.2M Earth station antennas system

(Read 1415 times)
probecom
Senior Member
★★★
Offline



Posts: 58
shaanxi , China
May 19th, 2011 at 10:08am  
Probecom 6.2m C/Ku-band Earth Station Antenna (Model C62T/K62T) with Tx./Rx. 2-port or Tx/Rx. 4-port feed in switchable circular/linear polarization which can offer superior Tx./Rx. performance. C62T/K62T 6.2M antenna reflector incorporates stretch-formed doubly contoured panels with matched radials and hub for ease of field alignment. The standard designed elevation over azimuth pedestal provides a cost-effective solution for high stiffness and stability, full orbital arc coverage and fine drive performance, and ensures the pointing accuracy required for C-band operation.

The antenna is Ring-focus antenna, and consists of main-reflector, sub-reflector, reflector skeleton, feed horn, etc. The advantage of the ring-focus antenna is that it can make the electromagnetic wave radiated from the feed horn to the center changed, the electromagnetic wave will reflected from the sub-reflector to the main reflector edge, and the electromagnetic wave that into the sub-reflector will reflector to the main reflector center.

Antenna reflector consists of a hub, 16 individual panels and 16 back structure struts. The antenna is a complete structure system on which 16 panels are connected by bolts and then connected with hub and back support struts. The structure is designed with the rigidity and strength as well as high surface accuracy.

It is easy for the ring-focus antenna to handle the contradiction of the primary occlusion and secondary occlusion, which will help to achieve high gain, low side lobe and good VSWR.

Probecom 6.2M satellite communication earth station antenna use ACU to adjust the antenna pointing. Pointing adjustment includes azimuth and elevation adjustment. After the equipments are assembled, adjust antenna pointing according to the azimuth and elevation data and combined with electrical adjustment to ensure the antenna in the optimum position and operating state.

About Probecom Co.,Ltd
Probecom Microwave Technology Co.,Ltd  is specially engaged in designing, manufacturing and installing satellite communication earth station antenna and relevant servo equipments. It can offer a complete line of earth station antenna products and systems, such as Satellite communication antennas, TVRO antennas, SNG Antennas, Flyaway antennas, antenna control system and tracking system.
**Details information**   
Please get the details information
from   https://www.probecom.cn/up_files/6.2m%20antennas%20.pdf
Back to top
 
 
IP Logged
 
Pages: 1