Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

HX50 bandwidth

(Read 3903 times)
cpippin11h
Member
★★
Offline



Posts: 3
Dec 1st, 2011 at 12:25pm  
Hello,

I've seen a lot of people seem to get results from this forum, so I figured I'd give it a shot.  Having issues with bandwidth from our HX50 setup.  We are in Afghanistan on the W6 Satellite.  My signal strength is consistantly between 92 and 94.
We are on the Corporate 2000 Premium package, being shared by 11 users.  Testing while hooked directly to the modem, we currently average around 400k-600k down and 120k-170k up (taken over the course of a week).  According to the package it should be able to burst to 1200k/256k peak and 2048k/512k off peak.  Non-contended is 900k peak and 1200k off peak.  The highest dl rate I have received after a week of checking is 890k once.  The highst ul rate I have received is 180k, again once.  Both were during off peak hours.  Any help tweaking the system would be greatly appreciated.  If I need to post any additional info, just let me know.
Back to top
 
 
IP Logged
 
USN - Retired
YaBB Moderator
★★★★★
Offline



Posts: 837
Kentucky (USA)
Reply #1 - Dec 1st, 2011 at 12:47pm  
First step in the troubleshooting process of an otherwise viable connection is to use a speed test server that's configured to deal with satellite connections. Latency and compression algorithms associated with sat connections have been known to fool servers that are otherwise configured to test terrestrial connections. It's always best to use the test server either provided by or recommended by your provider.

Second, eliminate the router from the equation. Connect one known good PC directly to the modem and test with a server known to support satellite connections.

//greg//
Back to top
 

USN (Ret)
 
IP Logged
 
A.Walker
Senior Member
★★★
Offline



Posts: 316
Reply #2 - Dec 1st, 2011 at 4:16pm  
Dear Sir

Greg is right about the speedtest and we recommend you use our speed test located on the Bentley Walker web site www.bentleywalker.com speed test (under support section) , I am assuming you are one of our customers either directly or indirectly anyhow please do 3 tests and send me the results ,

anthony@bentleywalker.com

Back to top
 
WWW  
IP Logged
 
cpippin11h
Member
★★
Offline



Posts: 3
Reply #3 - Dec 2nd, 2011 at 7:57am  
Thanks for the replies.  That is what I have been doing.  Connecting my computer directly to the HX50 modem and testing my bandwidth using the BW speed test site.  Doing a series of tests today to show you what I'm talking about.  Will email you the spreadsheet later today.
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
★★★
Offline



Posts: 2109
Reply #4 - Dec 2nd, 2011 at 9:25am  
You are also welcome to use my speed tester at https://www.satsig.net/speed-test/speed-tester.htm

If you want to run this tester several times it is important to click the link lower down on the speed tester page to avoid your test being made with a cached copy of the page..

The speed shown is affected by the speed of the satsig server, the speed of the terrestrial network network and the speed of your final satellite link to your site.

If you are with Bentley Walker ask about their turbo accelerator software.  This runs on your PC in conjunction with a similar compression filter at the teleport hub. I tried it and for very large plain text (log) files the compression was between 12:1 and 19:1.  For images much depends on the quality of the original image file and your quality setting for receiving pictures. A large high resolution image can be compressed to fair/low quality by perhaps 40:1.  If you want perfect download image quality there is no compression. There is no compression for video downloads. My review here: https://www.satsig.net/traffic/acceleration.htm

Best regards, Eric.
Back to top
 
 
IP Logged
 
cpippin11h
Member
★★
Offline



Posts: 3
Reply #5 - Dec 3rd, 2011 at 7:46am  
An example of a days worth of testing:


GMT              sig strength      DL      UL
12/2/11 5:46      93      693      186
12/2/11 5:54      93      615      221
12/2/11 5:56      93      681      162      
12/2/11 7:39      93      598      163
12/2/11 7:45      93      698      160      
12/2/11 7:49      94      548      150
12/2/11 9:35      93      507      139
12/2/11 9:40      93      466      115
12/2/11 9:48      94      738      124
Back to top
 
 
IP Logged
 
Pages: 1