Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Formulas use in Satcom

(Read 3202 times)
akki
Member
★★
Offline



Posts: 25
Apr 8th, 2012 at 4:06pm  
Dear Mr.Eric

Can you provide me all the formulas use in satcom like bandwidth calculation, center frequency , symbol rate , occupied bandwidth for SCPC and as well as in DVB-S2 , It will be nice if you help me in this , my email id is leoboy89@gmail.com

Best Regards,
Back to top
 
 
IP Logged
 
Eric Johnston
Senior Member
★★★
Offline



Posts: 2109
Reply #1 - Apr 8th, 2012 at 7:18pm  
As a baseline I suggest:
The occupied bandwidth = 1.19 to 1.2 x symbol rate.
The allocated bandwidth = 1.35 to 1.4 x symbol rate.

Allocated bandwidth is the amount of bandwidth you need to rent from the satellite transponder.  The satellite owner will decide, based on information about your carrier (symbol rate, power spectral density, filtering, frequency stability) so that you do not suffer unacceptable interference into your carrier from others or for you to cause unacceptable interference to others.  

If you have multiple adjacent carriers then, with agreement of the NOC, you can decide for yourself the spacing between your carriers.  If you move the carriers closer, your adjacent channel interference increases.

The shape of a DVB carrier is shown here:
https://www.satsig.net/spectrum-dvb-satellite.htm
wxw
Best regards, Eric.
Back to top
 
 
IP Logged
 
Pages: 1