Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

BUC Power vs Bandwidth

(Read 15527 times)
Ex Member
Ex Member




Dec 23rd, 2014 at 7:19am  
Hi All,

Can anyone provide me a formula or a calculator about the relation of the BUC power to the Satellite BW? I wanted to know how the BUC capacity (BUC Power) needed for any Upstream Carrier (1 mbps, 1.5mbps, 2 mbps).

Thanking you in advance.

SAT.
Back to top
 
 
IP Logged
 
Admin1
YaBB Admin
★★★★★
Offline



Posts: 1189
Reply #1 - Dec 23rd, 2014 at 9:48pm  
If you keep the modulation method (e.g. BPSK, QPSK, 8PSK etc) and the FEC ratio (e.g 1/2, 7/8. 0.91 etc) unchanged then the BUC power required is directly proportional to the bit rate, so you need twice the power for 2 Mbit/s compared with 1 Mbit/s.

The above information is only useful if you already know the specific BUC power required for a specific bit rate.

The bandwidth (measured in Hz, kHz or MHz etc, and to be paid for as a fractional transponder lease) depends on the information bit rate, FEC ratio and modulation method. See https://www.satsig.net/symbol01.htm for example calculations.

If you do not know the BUC power required for any bit rate you must start with a link budget.

Talk to the satellite operator and get their help, explaining what you want to do such including your uplink bit rate and preferred dish size and frequency band. They will be able to do full link budget calculations for you taking into account your location and the relevant teleport hub location and receive dish G/T. These calculations will result in the EIRP required from your site. You can achieve this required EIRP using a variety of BUC powers and transmit antenna size (and gain) as EIRP = BUC power + antenna TX gain. There will be a lower limit on your dish size to minimise interference from you into adjacent satellite networks.

Try playing with a link budget like this example:
https://www.satsig.net/link-budgets/paksat-vsat-return-link.htm

Note this provides for a hypothetical composite carrier of about 30 MHz bandwidth with a C/N of 11 dB. Choose a modulation type and FEC that fits this (allowing for rain margin/availability and whatever BER you want.). Determine the composite information bit rate (all carriers active).

If you want 1 Mbit/s divide the BUC power needed by ratio to the total bit rate. Reduce the BUC size further by using a larger dish.

Note that in an iDirect network you need a margin for uplink power control. A BUC rated at 4 times the clear sky power is suggested (giving +6dB UPPC range).

Best regards, Eric.
Back to top
« Last Edit: Jan 15th, 2021 at 11:58am by Admin1 »  
WWW  
IP Logged
 
VSATEngineer
Member
★★
Offline



Posts: 24
Reply #2 - Feb 19th, 2015 at 7:19am  
Eric, what do you mean about this "If you want 1 Mbit/s divide the BUC power needed by ratio to the total bit rate."?

thanks in advance
Back to top
 
 
IP Logged
 
BalkanTelekom
Member
★★
Offline



Posts: 48
Reply #3 - Feb 19th, 2015 at 8:33am  
Hi,

It means if your uplink is 1Mbps and working fine then you will need 3dB more BUC power to uplink 2 Mbps, 6dB more BUC power for 4Mbps etc. 3dB more means double the BUC size. (2Watts -> 4Watts , 4Watts->8Watts, 8Watts->16 Watts etc).

Hope this is clear.
Back to top
« Last Edit: Jan 15th, 2021 at 1:15am by Admin1 »  

Balkan Telekom http://balkantelekom.net
uydu internet http://go2sat.net
WWW  
IP Logged
 
Admin1
YaBB Admin
★★★★★
Offline



Posts: 1189
Reply #4 - Feb 19th, 2015 at 10:24am  
Thank you Balkan Telecom for that contribution. Quite right.

Assume a link budget simulation: A single 30 MHz wide carrier fills the transponder, with the transponder backed off so as to represent multicarrier operation. Input back off -4 dB, output back-off -1.5 dB. You get 11dB C/N overall, so it works and you may then choose any modulation/coding you wish that is fine with 11 dB C/N.

Say it needs 45 watts BUC power with a 1.2m uplink dish.

Having completed the design you could then fill the transponder with:
30 individual carriers, each 1 MHz wide, from 30 1.2m dishes, each with 1.5 watts BUC power.
or
15 individual carriers, each 1 MHz wide, from 15 1.2m dishes, each with 1.5 watts BUC power.
and 1 big carrier 15 MHz wide, from a 1.2m dish and 22.5watts.
or
15 individual carriers, each 1 MHz wide, from 15 1.2m dishes, each with 1.5 watts BUC power.
and 1 big carrier 15 MHz wide, from a larger 2.4m dish with 5.625watts.
Note that the bigger 2.4m dish has 4 times (+6dB) the gain of a 1.2m antenna, so to get the same EIRP you divide HPA power by 4, or -6 dB.

Do ask if you or others have more queries.

Best regards, Eric
Back to top
« Last Edit: Jan 15th, 2021 at 11:57am by Admin1 »  
WWW  
IP Logged
 
VSATEngineer
Member
★★
Offline



Posts: 24
Reply #5 - Feb 22nd, 2015 at 5:33am  
Dear Balkan Telecom and Eric, thanks alot for your explanation! I still have a question, how do we come to the conclusion that 1 MHz needs 1.5 Watt which is needed for 1 Mbps throughput?

Thanks in Advance!
Back to top
 
 
IP Logged
 
Admin1
YaBB Admin
★★★★★
Offline



Posts: 1189
Reply #6 - Feb 23rd, 2015 at 5:18pm  
I've tried to answer the question here:
How to work out BUC power

Best regards, Eric.
Back to top
 
WWW  
IP Logged
 
Zeus
Member
★★
Offline



Posts: 6
Reply #7 - Jan 14th, 2021 at 5:36pm  
I am using 1.8 m Antenna C band for remote &
5 watt BUC.
My customer want to use 4M internet access.
Is it possible..?
if not how much BUC power should to need to gain
internet 2-4M for customer..?
thanks
Back to top
 
 
IP Logged
 
Admin1
YaBB Admin
★★★★★
Offline



Posts: 1189
Reply #8 - Jan 15th, 2021 at 1:22am  
Do a return link link budget with the help of the satellite operator. Details you need are the satellite uplink G/T contour over the site and the uplink power flux density per MHz on that contour normally used by the satellite operator for a transponder with multiple carriers.
Back to top
 
WWW  
IP Logged
 
Admin1
YaBB Admin
★★★★★
Offline



Posts: 1189
Reply #9 - Jan 15th, 2021 at 11:56am  
Just a recap on how to get started with link budgets:

First you need to get a good understanding of the G/T, PFD and EIRP data about the satellite transponder.

Get hold of the coverage beam maps.

The uplink coverage map will show uplink G/T contours. Note down the G/T for your uplink location. This is the only reliable figure which does not need adjustment.

The uplink coverage map contours are also needed to find the uplink PFDsat for your site. PFDsat figures are shown against each contour lines. Unfortunately you need to know  what gain step setting of the transponder they refer to. Ask the satellite operator.  They can tell you what is the gain setting of each transponder. Make sure you understand which contour the PFDsat refers to. It might be the beam centre. It might be some beam edge (e.g -4.5 dB down), or other contour.

Also, while you are at it, ask what input and output back off they require for single carrier and multicarrier operation and what carrier/intermod is expected. For single carrier in the transponder 0 dB or 0.5 dB output back off might be applicable, for multicarrier operation maybe -2 to -3 dB. 

The downlink EIRP coverage map will show the EIRP levels on the downlink beam when the transponder is saturated with a single carrier. When the transponder is operated with multiple carriers the transponder operating point needs to be backed off to reduce intermodulation interference to about -21 dB. The output back off might be something like -2 or -3 dB reduction from maximum EIRP, depending on how linear is the satellite downlink high power amplifier.

You will often find that actual operating conditions do not match your calculated link budget. The reason may be that the contours are "the specification" and the actual satellite performance is better, e.g. higher G/T and higher EIRP. Over the satellite life the performance may degrade to "the specification" values. Your own allowances for uplink, intermodulation and downlink interference will not match reality, varying over the years.

Now you can start a link budget calculation.

I hope that helps.
Back to top
 
WWW  
IP Logged
 
Pages: 1