Advertisment: Broadband via satellite
Advertisment: Worldwide satellite services from Ground Control Company

www.satsig.net

Satellite Internet Forum.

Welcome, Guest.        Forum rules.
      Home            Login            Register          
Pages: 1

Tooway Ka-Sat downlink and uplink assignments

(Read 4716 times)
bgknudson1
Member
★★
Offline



Posts: 1
Aug 31st, 2015 at 9:53pm  
Within each  unique KA-SAT spot beam, how many downlink channels are there, and what are the associated  bandwidths.  In response, how many uplink frequencies can a Modem select from and what are the associated bandwidths?
Back to top
 
 
IP Logged
 
Admin1
YaBB Admin
★★★★★
Offline



Posts: 1189
Reply #1 - Sep 1st, 2015 at 11:17am  
I can only give part of the answer.

Each of the 82 spot beams has 250 MHz bandwidth and I believe there are 3 carriers each occupying 65 MHz and one carrier occupying 50 MHz of allocated bandwidth. I would guess these carriers are 52 and 40 Msps 8PSK 5/6 with information bit rates of 130 and 100 Mbit/s giving a total of 490 Mbit/s per beam, shared amongst the number of customers per beam. These figures are 'clear sky'.  In rain the modulation type and FEC change to maintain service with lower information rates.

A typical customer, with a 500 MHz wide receiver, will see 4 high level wanted carriers on the wanted polarisation occupying half the rx cable bandwidth, plus possibly 4 lower level carriers from one adjacent beam. Using the wrong receive polarisation a customer might see 8 lower level carriers from two adjacent beams.

If anyone has spectrum analyser plots of what they can see it would be helpful to put them here. Send to me eric@satsig.net




Back to top
« Last Edit: Sep 1st, 2015 at 1:13pm by Admin1 »  
WWW  
IP Logged
 
Pages: 1