Post by Rockiii on Apr 18th, 2017 at 5:41pm
Hey guys, happy to be here.
I need some suggestions about the connection of my TP-Link WR840N and the Surfbeam2.
At the moment i connect through the WAN Port of the TP, but i'm just wondering if i could improve the speed if i use it as an access point.
Unfortunatly i couldn't get it working.
Our Surfbeam2 is working with the following specs.
https://www.satsig.net/yabbfiles/Attachments/TRIA_status.JPG
https://www.satsig.net/yabbfiles/Attachments/Modem_Status.JPG
The TP-Link is working with this specs
https://www.satsig.net/yabbfiles/Attachments/tp_link_status.JPG
Could anybody advise me a good working config to get this crap working?
TRIA_status.JPG (45 KB | 399
)
Modem_Status.JPG (55 KB | 411
)
tp_link_status.JPG (32 KB | 385
)
I need some suggestions about the connection of my TP-Link WR840N and the Surfbeam2.
At the moment i connect through the WAN Port of the TP, but i'm just wondering if i could improve the speed if i use it as an access point.
Unfortunatly i couldn't get it working.
Our Surfbeam2 is working with the following specs.
https://www.satsig.net/yabbfiles/Attachments/TRIA_status.JPG
https://www.satsig.net/yabbfiles/Attachments/Modem_Status.JPG
The TP-Link is working with this specs
https://www.satsig.net/yabbfiles/Attachments/tp_link_status.JPG
Could anybody advise me a good working config to get this crap working?
TRIA_status.JPG (45 KB | 399
)
Modem_Status.JPG (55 KB | 411
)
tp_link_status.JPG (32 KB | 385
)