Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> LinkStar Forum: VSAT hubs and terminals >> Strange behavior on Linkstar
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1154344219

Message started by iceman on Jul 31st, 2006 at 12:10pm

Title: Strange behavior on Linkstar
Post by iceman on Jul 31st, 2006 at 12:10pm
Two out of four Linkstar boxes i have ordered recently are having the same problem...the "SAT" led will not come on.
When i telnet into the box and use the command tcmp,i can see that the coderate section as A/N instead of 5/6..
At first i thought the bootstring was missing so i applied it and it was accepted by the box but even after a reboot i still have the same problem..
Has anyone else experienced similar problem lately?

iceman

PS...I am definately on the right bird cos i have another linkstar working perfectly OK when connected to the same outdoor unit..

Title: Re: Strange behavior on Linkstar
Post by iceman on Aug 1st, 2006 at 3:02pm
Problem solved...Apparently i was given the wrong bootstring parameters....loaded the correct one and now all is OK..

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.