| Satellite Internet forum | |
|
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> LinkStar Forum: VSAT hubs and terminals >> How can I know Linkstar modem is locked https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1172610707 Message started by alaklubimsaa on Feb 27th, 2007 at 9:11pm |
|
|
Title: How can I know Linkstar modem is locked Post by alaklubimsaa on Feb 27th, 2007 at 9:11pm
I buoght new linkstar modem from reseller in SA .When I connected it to dish ,the led SAT not work and the value of error is constant and equal to 0.11348
Please if any body know how to remove lock,help me. |
|
Title: Re: How can I know Linkstar modem is locked Post by Eric Johnston on Mar 1st, 2007 at 5:17pm
Maybe the box it is not pre-tuned correctly. Have you typed in the text line that configures the frequency, symbol rate etc. ? If so, check again that every character is correct. Tell us your configuration line that you are using. Read the data back from the screen (use pconf). Has it all gone in correctly?
Check with your service provider that you have the right text line. Maybe you have not pointed at the satellite yet. The SAT led flashes slowly when you find the satellite and then fast once it locks onto the correct carrier. Maybe your polarisation is the wrong way. First set it to nominal as told (vertical or horizontal), then adjust clockwise for positive adjustment, while FACING TOWARDS the satellite. Note that once the carrier is being received, the BER display does not update on its own. You need to make many tcmp commands to take many measurements while turning the nuts 1/2 a turn at a time. It will take at least 30 minutes to peak up and secure the dish, after you have found the satellite. https://www.link-sat.net/linkstar-command-tcmp.htm wxw Best regard, Eric. |
|
Title: Re: How can I know Linkstar modem is locked Post by alaklubimsaa on Mar 1st, 2007 at 8:49pm
Thanks for answer. Please open below link for tcmp command result
https://img340.imageshack.us/img340/7904/linkstarstatusyd6.jpg Can anyone help please. What is the problem ? Is this site locked ? .... Admin |
|
Title: Re: How can I know Linkstar modem is locked Post by DGN on Mar 13th, 2007 at 3:33pm
kind problem occurs when the RX has no any signal from the satellite carrier.
Please be sure that you have an reply from the carrier and if the LNB Model works on that Frequency cause it varies on Low band and High Band Freq. Regards, Discovery Global Network - Support Team |
|
Title: Re: How can I know Linkstar modem is locked Post by alaklubimsaa on Mar 14th, 2007 at 3:28am
Thank you DGN.The signal is recived .The SAT indication now is flashing.Please open and show the dwon link
https://img98.imageshack.us/img98/7243/tcmpsx0.gif Appreciating you help. |
|
Title: Re: How can I know Linkstar modem is locked Post by DGN on Mar 18th, 2007 at 3:56pm
Please be informed that the BER Value is still low in order to get that synchronized. Which is the location and the satellite you are pointing, antenna size, BUC type?
Regards, Discovery Global Network - Support Team |
|
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |
