Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
Service Providers >> Satellite Connection in Africa >> SCPC hardware and Bandwidth needed https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1179486336 Message started by papayeya on May 18th, 2007 at 12:05pm |
Title: SCPC hardware and Bandwidth needed Post by papayeya on May 18th, 2007 at 12:05pm
Dear All,
All the VSAT providers only are invited to send their offers based on the below requirments, you may send your offer/questions to the following email: Project Description: VOIP termination Capacity: 2 E1s up to 12 E1s. VSAT Hardware avilable: 2.4m Antenna C-Band, and 1.8m Antenna Ku-Band, 2 AND 3 Watt BUCs. VOIP Hardware avilable: VOIP router avilable: Cisco AS5300. Type of Encoding: H323. Your hardware should be able to handle the upgrade from 2 E1s to 12 E1s and must have warranty. Your compnay profile must be speicalist in VOIP and done this projects before. You must be a VSAT provider not a reseller or agent, if you are agent or reseller you should coporate with him in order to provider his offer. All the participates must have a registered company. Best Regards PaPaYeYa |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |