Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> IPCop linux blocked iSite what i can do? https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1189457251 Message started by VbGuy on Jun 18th, 2007 at 2:21am |
Title: IPCop linux blocked iSite what i can do? Post by VbGuy on Jun 18th, 2007 at 2:21am
Recently I installed IPCop on PC as cache server to speed the things a bit faster ....
But i face problem with iSite, I can log in but nothing elese, I just can see the configuration page only. I need to see IP stats page but it disabled ... when i connect my pc directly without ipcop (Through wireless Access point) to the modem everything okay, even the modem appear directly without need to chose new from file menu and enter the ip , i just chose login, It seems like IPCop block some port that modem need to be open. Any one have experience this with IPCop linux ? Which port iSite use to connect with the modem ? |
Title: Re: IPCop linux blocked iSite what i can do? Post by ahmedmaher30 on Jul 2nd, 2007 at 8:19pm
Look Sir, I don't know much More about the IPCOP linux but i had the same problem when i Connect the iDirect modem with ISA server
what i want to say ..if you connect the iDirect modem to any caching server you will face the same problem, So, to avoid this when you need to See your modem configuration, just connect it by Cross Cable Directly. |
Title: Re: IPCop linux blocked iSite what i can do? Post by VbGuy on Jul 4th, 2007 at 4:08pm
Thanx ahmedmaher30 for your reply ,,,
The problem solved by Portforward . The port number is 9001 udp . |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |